Anker Solix 2 Pro 0 values filter template Sensor

[thealkly]

If anyone is using the non supported Anker Solix 2 Pros with the integration, sometimes based on the Anker Cloud 0 Values are send back to home Assistant.
I just created a hack "solution" to filter out 0 Values locally. Perhaps this helps some Solar Bank 2 Users:

  
sensor:
  - platform: template
    sensors:
      valid_sensor:
        friendly_name: "Solarbank2_SOC_Filter1"
        unit_of_measurement: "%"
        value_template: >
          {% set current_value = states('sensor.solarbank_2_e1600_pro_ladestand') %}
          {% set last_value = states('sensor.valid_sensor') %}
          {% if current_value not in ['unknown', 'unavailable', 'none'] %}
            {% set current_value = current_value | float %}
          {% else %}
            {% set current_value = 0 %}
          {% endif %}
          {% if last_value not in ['unknown', 'unavailable', 'none'] %}
            {% set last_value = last_value | float %}
          {% else %}
            {% set last_value = 0 %}
          {% endif %}
          {% if current_value != 0 %}
            {{ current_value }}
          {% else %}
            {{ last_value }}
          {% endif %}
  
      valid_sensor_akkuleistung:
        friendly_name: "Solarbank2_Akkuleistung"
        unit_of_measurement: "W"
        value_template: >
          {% set current_value = states('sensor.solarbank_2_e1600_pro_akkuleistung') %}
          {% set last_value = states('sensor.valid_sensor_akkuleistung') %}
          {% if current_value not in ['unknown', 'unavailable', 'none'] %}
            {% set current_value = current_value | float %}
          {% else %}
            {% set current_value = 0 %}
          {% endif %}
          {% if last_value not in ['unknown', 'unavailable', 'none'] %}
            {% set last_value = last_value | float %}
          {% else %}
            {% set last_value = 0 %}
          {% endif %}
          {% if current_value != 0 %}
            {{ current_value }}
          {% else %}
            {{ last_value }}
          {% endif %}

      valid_sensor_einspeiseleistung:
        friendly_name: "Solarbank2_Einspeiseleistung"
        unit_of_measurement: "W"
        value_template: >
          {% set current_value = states('sensor.solarbank_2_e1600_pro_einspeiseleistung') %}
          {% set last_value = states('sensor.valid_sensor_einspeiseleistung') %}
          {% if current_value not in ['unknown', 'unavailable', 'none'] %}
            {% set current_value = current_value | float %}
          {% else %}
            {% set current_value = 0 %}
          {% endif %}
          {% if last_value not in ['unknown', 'unavailable', 'none'] %}
            {% set last_value = last_value | float %}
          {% else %}
            {% set last_value = 0 %}
          {% endif %}
          {% if current_value != 0 %}
            {{ current_value }}
          {% else %}
            {{ last_value }}
          {% endif %}

      valid_sensor_solarleistung:
        friendly_name: "Solarbank2_Solarleistung"
        unit_of_measurement: "W"
        value_template: >
          {% set current_value = states('sensor.solarbank_2_e1600_pro_solarleistung') %}
          {% set last_value = states('sensor.valid_sensor_solarleistung') %}
          {% if current_value not in ['unknown', 'unavailable', 'none'] %}
            {% set current_value = current_value | float %}
          {% else %}
            {% set current_value = 0 %}
          {% endif %}
          {% if last_value not in ['unknown', 'unavailable', 'none'] %}
            {% set last_value = last_value | float %}
          {% else %}
            {% set last_value = 0 %}
          {% endif %}
          {% if current_value != 0 %}
            {{ current_value }}
          {% else %}
            {{ last_value }}
          {% endif %}

[Flopsi75]

Hello, what do I have to do with the data? The zero values ​​bother me a lot.

[thomluther]

I think there are meanwhile 2 fixes for this issue:

1. Anker changed the cloud few days ago and no longer responds with invalid data. Probably mainly to fix their issue when the App is used with the shared account, which did not see any values most of the time. NOTE: the cloud change did NOT change the data update frequency, its still slow with 5 minutes default from what I have heard
2. The new integration version 2.0.0 has an option to ignore such invalid data responses, in case that should happen again in future.