cjpeg.1

.TH CJPEG 1 "30 August 2024"
.SH NAME
cjpeg \- compress an image file to a JPEG file
.SH SYNOPSIS
.B cjpeg
[
.I options
]
[
.I filename
]
.LP
.SH DESCRIPTION
.LP
.B cjpeg
compresses the named image file, or the standard input if no file is
named, and produces a JPEG/JFIF file on the standard output.
The currently supported input file formats are: PPM (PBMPLUS color
format), PGM (PBMPLUS grayscale format), BMP, GIF [legacy feature], and Targa
[legacy feature].
.SH OPTIONS
All switch names may be abbreviated; for example,
.B \-grayscale
may be written
.B \-gray
or
.BR \-gr .
Most of the "basic" switches can be abbreviated to as little as one letter.
Upper and lower case are equivalent (thus
.B \-BMP
is the same as
.BR \-bmp ).
British spellings are also accepted (e.g.
.BR \-greyscale ),
though for brevity these are not mentioned below.
.PP
The basic switches are:
.TP
.BI \-quality " N[,...]"
Scale quantization tables to adjust image quality.  Quality is 0 (worst) to
100 (best); default is 75.  (See below for more info.)
.TP
.B \-grayscale
Create monochrome JPEG file from color input.  By specifying
.BR \-grayscale,
you'll get a smaller JPEG file that takes less time to process.
.TP
.B \-rgb
Create RGB JPEG file.  Using this switch suppresses the conversion from RGB
colorspace input to the default YCbCr JPEG colorspace.
.TP
.B \-optimize
Perform optimization of entropy encoding parameters.  Without this, default
encoding parameters are used.
.B \-optimize
usually makes the JPEG file a little smaller, but
.B cjpeg
runs somewhat slower and needs much more memory.  Image quality and speed of
decompression are unaffected by
.BR \-optimize .
.TP
.B \-progressive
Create progressive JPEG file (see below).  Implies
.B \-optimize
unless
.B \-arithmetic
is also specified.
.TP
.B \-targa
Input file is Targa format [legacy feature].  Targa files that contain an
"identification" field will not be automatically recognized by
.BR cjpeg .
For such files, you must specify
.B \-targa
to make
.B cjpeg
treat the input as Targa format.  For most Targa files, you won't need this
switch.
.PP
The
.B \-quality
switch lets you trade off compressed file size against quality of the
reconstructed image: the higher the quality setting, the larger the JPEG file,
and the closer the output image will be to the original input.  Normally you
want to use the lowest quality setting (smallest file) that decompresses into
something visually indistinguishable from the original image.  For this
purpose the quality setting should generally be between 50 and 95 (the default
is 75) for photographic images.  If you see defects at
.B \-quality
75, then go up 5 or 10 counts at a time until you are happy with the output
image.  (The optimal setting will vary from one image to another.)
.PP
.B \-quality
100 will generate a quantization table of all 1's, minimizing loss in the
quantization step (but there is still information loss in subsampling, as well
as roundoff error.)  For most images, specifying a quality value above
about 95 will increase the size of the compressed file dramatically, and while
the quality gain from these higher quality values is measurable (using metrics
such as PSNR or SSIM), it is rarely perceivable by human vision.
.PP
In the other direction, quality values below 50 will produce very small files
of low image quality.  Settings around 5 to 10 might be useful in preparing an
index of a large image library, for example.  Try
.B \-quality
2 (or so) for some amusing Cubist effects.  (Note: quality
values below about 25 generate 2-byte quantization tables, which are
considered optional in the JPEG standard.
.B cjpeg
emits a warning message when you give such a quality value, because some
other JPEG programs may be unable to decode the resulting file.  Use
.B \-baseline
if you need to ensure compatibility at low quality values.)
.PP
The \fB-quality\fR option has been extended in this version of \fBcjpeg\fR to
support separate quality settings for luminance and chrominance (or, in
general, separate settings for every quantization table slot.)  The principle
is the same as chrominance subsampling:  since the human eye is more sensitive
to spatial changes in brightness than spatial changes in color, the chrominance
components can be quantized more than the luminance components without
incurring any visible image quality loss.  However, unlike subsampling, this
feature reduces data in the frequency domain instead of the spatial domain,
which allows for more fine-grained control.  This option is useful in
quality-sensitive applications, for which the artifacts generated by
subsampling may be unacceptable.
.PP
The \fB-quality\fR option accepts a comma-separated list of parameters, which
respectively refer to the quality levels that should be assigned to the
quantization table slots.  If there are more q-table slots than parameters,
then the last parameter is replicated.  Thus, if only one quality parameter is
given, this is used for both luminance and chrominance (slots 0 and 1,
respectively), preserving the legacy behavior of cjpeg v6b and prior.
More (or customized) quantization tables can be set with the \fB-qtables\fR
option and assigned to components with the \fB-qslots\fR option (see the
"wizard" switches below.)
.PP
JPEG files generated with separate luminance and chrominance quality are fully
compliant with standard JPEG decoders.
.PP
.BR CAUTION:
For this setting to be useful, be sure to pass an argument of \fB-sample 1x1\fR
to \fBcjpeg\fR to disable chrominance subsampling.  Otherwise, the default
subsampling level (2x2, AKA "4:2:0") will be used.
.PP
The
.B \-progressive
switch creates a "progressive JPEG" file.  In this type of JPEG file, the data
is stored in multiple scans of increasing quality.  If the file is being
transmitted over a slow communications link, the decoder can use the first
scan to display a low-quality image very quickly, and can then improve the
display with each subsequent scan.  The final image is exactly equivalent to a
standard JPEG file of the same quality setting, and the total file size is
about the same --- often a little smaller.
.PP
Switches for advanced users:
.TP
.BI \-precision " N"
Create JPEG file with N-bit data precision.  N is 8, 12, or 16; default is 8.
If N is 16, then
.B -lossless
must also be specified.  Note that only the PBMPLUS input file format supports
data precisions other than 8.  (For historical reasons,
.B cjpeg
allows GIF input files to be converted into 12-bit-per-sample JPEG files, but
this is not a useful conversion.)  Note also that PBMPLUS input files are
silently scaled to the target data precision, even if it is lower than the
precision of the input file.  Passing an argument of
.B \-verbose
to
.B cjpeg
will cause it to print information about the precision of the input file.
.B Caution:
12-bit and 16-bit data precision is not yet widely implemented, so many
decoders will be unable to handle a 12-bit-per-sample or 16-bit-per-sample JPEG
file at all.
.IP
.B \-precision\ 12
implies
.B \-optimize
unless
.B \-arithmetic
is also specified.
.TP
.BI \-lossless " psv[,Pt]"
Create a lossless JPEG file using the specified predictor selection value
(1 through 7) and optional point transform (0 through
.nh
.I precision
.hy
- 1, where
.nh
.I precision
.hy
is the JPEG data precision in bits).  A point transform value of 0 (the
default) is necessary in order to create a fully lossless JPEG file.  (A
non-zero point transform value right-shifts the input samples by the specified
number of bits, which is effectively a form of lossy color quantization.)
.B Caution:
lossless JPEG is not yet widely implemented, so many decoders will be unable to
handle a lossless JPEG file at all.  In most cases, compressing and
decompressing a lossless JPEG file is considerably slower than compressing and
decompressing a lossy JPEG file, and lossless JPEG files are much larger than
lossy JPEG files.  Also note that the following features will be unavailable
when compressing or decompressing a lossless JPEG file:
.IP
- Quality/quantization table selection
.IP
- Color space conversion (the JPEG image will use the same color space as the
input image)
.IP
- Color quantization
.IP
- DCT/IDCT algorithm selection
.IP
- Smoothing
.IP
- Downsampling/upsampling
.IP
- IDCT scaling
.IP
- Partial image decompression
.IP
- Transformations using
.B jpegtran
.IP
Any switches used to enable or configure those features will be ignored.
.TP
.B \-arithmetic
Use arithmetic coding.
.B Caution:
arithmetic-coded JPEG is not yet widely implemented, so many decoders will be
unable to handle an arithmetic-coded JPEG file at all.
.TP
.B \-dct int
Use accurate integer DCT method (default).
.TP
.B \-dct fast
Use less accurate integer DCT method [legacy feature].
When the Independent JPEG Group's software was first released in 1991, the
compression time for a 1-megapixel JPEG image on a mainstream PC was measured
in minutes.  Thus, the \fBfast\fR integer DCT algorithm provided noticeable
performance benefits.  On modern CPUs running libjpeg-turbo, however, the
compression time for a 1-megapixel JPEG image is measured in milliseconds, and
thus the performance benefits of the \fBfast\fR algorithm are much less
noticeable.  On modern x86/x86-64 CPUs that support AVX2 instructions, the
\fBfast\fR and \fBint\fR methods have similar performance.  On other types of
CPUs, the \fBfast\fR method is generally about 5-15% faster than the \fBint\fR
method.

For quality levels of 90 and below, there should be little or no perceptible
quality difference between the two algorithms.  For quality levels above 90,
however, the difference between the \fBfast\fR and \fBint\fR methods becomes
more pronounced.  With quality=97, for instance, the \fBfast\fR method incurs
generally about a 1-3 dB loss in PSNR relative to the \fBint\fR method, but
this can be larger for some images.  Do not use the \fBfast\fR method with
quality levels above 97.  The algorithm often degenerates at quality=98 and
above and can actually produce a more lossy image than if lower quality levels
had been used.  Also, in libjpeg-turbo, the \fBfast\fR method is not fully
accelerated for quality levels above 97, so it will be slower than the
\fBint\fR method.
.TP
.B \-dct float
Use floating-point DCT method [legacy feature].
The \fBfloat\fR method does not produce significantly more accurate results
than the \fBint\fR method, and it is much slower.  The \fBfloat\fR method may
also give different results on different machines due to varying roundoff
behavior, whereas the integer methods should give the same results on all
machines.
.TP
.BI \-icc " file"
Embed ICC color management profile contained in the specified file.
.TP
.BI \-restart " N"
Emit a JPEG restart marker every N MCU rows, or every N MCUs if "B" is attached
to the number.
.IP
In typical JPEG images, an MCU (Minimum Coded Unit) is the minimum set of
interleaved "data units" (8x8 DCT blocks if the image is lossy or samples if
the image is lossless) necessary to represent at least one data unit per
component.  (For example, an MCU in an interleaved lossy JPEG image that uses
4:2:2 subsampling consists of two luminance blocks followed by one block for
each chrominance component.)  In single-component or non-interleaved JPEG
images, an MCU is the same as a data unit.  An MCU row is a row of MCUs
spanning the entire width of the image.
.IP
.B \-restart 0
(the default) means no restart markers.
.TP
.BI \-smooth " N"
Smooth the input image to eliminate dithering noise.  N, ranging from 1 to
100, indicates the strength of smoothing.  0 (the default) means no smoothing.
.TP
.BI \-maxmemory " N"
Set limit for amount of memory to use in processing large images.  Value is
in thousands of bytes, or millions of bytes if "M" is attached to the
number.  For example,
.B \-max 4m
selects 4000000 bytes.  If more space is needed, an error will occur.
.TP
.BI \-outfile " name"
Send output image to the named file, not to standard output.
.TP
.BI \-memdst
Compress to memory instead of a file.  This feature was implemented mainly as a
way of testing the in-memory destination manager (jpeg_mem_dest()), but it is
also useful for benchmarking, since it reduces the I/O overhead.
.TP
.BI \-report
Report compression progress.
.TP
.BI \-strict
Treat all warnings as fatal.  Enabling this option will cause the compressor to
abort if an LZW-compressed GIF input image contains incomplete or corrupt image
data.
.TP
.B \-verbose
Enable debug printout.  More
.BR \-v 's
give more output.  Also, version information is printed at startup.
.TP
.B \-debug
Same as
.BR \-verbose .
.TP
.B \-version
Print version information and exit.
.PP
The
.B \-restart
option inserts extra markers that allow a JPEG decoder to resynchronize after
a transmission error.  Without restart markers, any damage to a compressed
file will usually ruin the image from the point of the error to the end of the
image; with restart markers, the damage is usually confined to the portion of
the image up to the next restart marker.  Of course, the restart markers
occupy extra space.  We recommend
.B \-restart 1
for images that will be transmitted across unreliable networks such as Usenet.
.PP
The
.B \-smooth
option filters the input to eliminate fine-scale noise.  This is often useful
when converting dithered images to JPEG: a moderate smoothing factor of 10 to
50 gets rid of dithering patterns in the input file, resulting in a smaller
JPEG file and a better-looking image.  Too large a smoothing factor will
visibly blur the image, however.
.PP
Switches for wizards:
.TP
.B \-baseline
Force baseline-compatible quantization tables to be generated.  This clamps
quantization values to 8 bits even at low quality settings.  (This switch is
poorly named, since it does not ensure that the output is actually baseline
JPEG.  For example, you can use
.B \-baseline
and
.B \-progressive
together.)
.TP
.BI \-qtables " file"
Use the quantization tables given in the specified text file.
.TP
.BI \-qslots " N[,...]"
Select which quantization table to use for each color component.
.TP
.BI \-sample " HxV[,...]"
Set JPEG sampling factors for each color component.
.TP
.BI \-scans " file"
Use the scan script given in the specified text file.
.PP
The "wizard" switches are intended for experimentation with JPEG.  If you
don't know what you are doing, \fBdon't use them\fR.  These switches are
documented further in the file wizard.txt.
.SH EXAMPLES
.LP
This example compresses the PPM file foo.ppm with a quality factor of
60 and saves the output as foo.jpg:
.IP
.B cjpeg \-quality
.I 60 foo.ppm
.B >
.I foo.jpg
.SH HINTS
Color GIF files are not the ideal input for JPEG; JPEG is really intended for
compressing full-color (24-bit through 48-bit) images.  In particular, don't
try to convert cartoons, line drawings, and other images that have only a few
distinct colors.  GIF works great on these; JPEG does not.  If you want to
convert a GIF to JPEG, you should experiment with
.BR cjpeg 's
.B \-quality
and
.B \-smooth
options to get a satisfactory conversion.
.B \-smooth 10
or so is often helpful.
.PP
Avoid running an image through a series of JPEG compression/decompression
cycles.  Image quality loss will accumulate; after ten or so cycles the image
may be noticeably worse than it was after one cycle.  It's best to use a
lossless format while manipulating an image, then convert to JPEG format when
you are ready to file the image away.
.PP
The
.B \-optimize
option to
.B cjpeg
is worth using when you are making a "final" version for posting or archiving.
It's also a win when you are using low quality settings to make very small
JPEG files; the percentage improvement is often a lot more than it is on
larger files.  (At present,
.B \-optimize
mode is always selected when generating progressive JPEG files.)
.SH ENVIRONMENT
.TP
.B JPEGMEM
If this environment variable is set, its value is the default memory limit.
The value is specified as described for the
.B \-maxmemory
switch.
.B JPEGMEM
overrides the default value specified when the program was compiled, and
itself is overridden by an explicit
.BR \-maxmemory .
.SH SEE ALSO
.BR djpeg (1),
.BR jpegtran (1),
.BR rdjpgcom (1),
.BR wrjpgcom (1)
.br
.BR ppm (5),
.BR pgm (5)
.br
Wallace, Gregory K.  "The JPEG Still Picture Compression Standard",
Communications of the ACM, April 1991 (vol. 34, no. 4), pp. 30-44.
.SH AUTHOR
Independent JPEG Group
.PP
This file was modified by The libjpeg-turbo Project to include only information
relevant to libjpeg-turbo, to wordsmith certain sections, and to describe
features not present in libjpeg.
.SH ISSUES
Not all variants of BMP and Targa file formats are supported.