New instructions for running web UI on macOS (check here for macOS related issues)

[brkirch]

Mac users: Please provide feedback on if these instructions do or don't work for you, and if anything is unclear or you are otherwise still having problems with your install that are not currently mentioned here.

Important notes

Currently most functionality in the web UI works correctly on macOS, with the most notable exceptions being CLIP interrogator and training. Although training does seem to work, it is incredibly slow and consumes an excessive amount of memory. CLIP interrogator can be used but it doesn't work correctly with the GPU acceleration macOS uses so the default configuration will run it entirely via CPU (which is slow).

Most samplers are known to work with the only exception being the PLMS sampler when using the Stable Diffusion 2.0 model. Generated images with GPU acceleration on macOS should usually match or almost match generated images on CPU with the same settings and seed.

Automatic installation

New install:

1. If Homebrew is not installed, follow the instructions at https://brew.sh to install it. Keep the terminal window open and follow the instructions under "Next steps" to add Homebrew to your PATH.
2. Open a new terminal window and run brew install cmake protobuf rust [email protected] git wget
3. Clone the web UI repository by running git clone https://github.com/AUTOMATIC1111/stable-diffusion-webui
4. Place Stable Diffusion models/checkpoints you want to use into stable-diffusion-webui/models/Stable-diffusion. If you don't have any, see Downloading Stable Diffusion Models below.
5. cd stable-diffusion-webui and then ./webui.sh to run the web UI. A Python virtual environment will be created and activated using venv and any remaining missing dependencies will be automatically downloaded and installed.
6. To relaunch the web UI process later, run ./webui.sh again. Note that it doesn't auto update the web UI; to update, run git pull before running ./webui.sh.

Existing Install:

If you have an existing install of web UI that was created with setup_mac.sh, delete the run_webui_mac.sh file and repositories folder from your stable-diffusion-webui folder. Then run git pull to update web UI and then ./webui.sh to run it.

Downloading Stable Diffusion Models

If you don't have any models to use, Stable Diffusion models can be downloaded from Hugging Face. To download, click on a model and then click on the Files and versions header. Look for files listed with the ".ckpt" or ".safetensors" extensions, and then click the down arrow to the right of the file size to download them.

Some popular official Stable Diffusion models are:

• Stable DIffusion 1.4 (sd-v1-4.ckpt)
• Stable Diffusion 1.5 (v1-5-pruned-emaonly.ckpt)
• Stable Diffusion 1.5 Inpainting (sd-v1-5-inpainting.ckpt)

Stable Diffusion 2.0 and 2.1 require both a model and a configuration file, and image width & height will need to be set to 768 or higher when generating images:

• Stable Diffusion 2.0 (768-v-ema.ckpt)
• Stable Diffusion 2.1 (v2-1_768-ema-pruned.ckpt)

For the configuration file, hold down the option key on the keyboard and click here to download v2-inference-v.yaml (it may download as v2-inference-v.yaml.yml). In Finder select that file then go to the menu and select File > Get Info. In the window that appears select the filename and change it to the filename of the model, except with the file extension .yaml instead of .ckpt, press return on the keyboard (confirm changing the file extension if prompted), and place it in the same folder as the model (e.g. if you downloaded the 768-v-ema.ckpt model, rename it to 768-v-ema.yaml and put it in stable-diffusion-webui/models/Stable-diffusion along with the model).

Also available is a Stable Diffusion 2.0 depth model (512-depth-ema.ckpt). Download the v2-midas-inference.yaml configuration file by holding down option on the keyboard and clicking here, then rename it with the .yaml extension in the same way as mentioned above and put it in stable-diffusion-webui/models/Stable-diffusion along with the model. Note that this model works at image dimensions of 512 width/height or higher instead of 768.

Troubleshooting

Web UI Won't Start:

If you encounter errors when trying to start the Web UI with ./webui.sh, try deleting the repositories and venv folders from your stable-diffusion-webui folder and then update web UI with git pull before running ./webui.sh again.

Poor Performance:

Currently GPU acceleration on macOS uses a lot of memory. If performance is poor (if it takes more than a minute to generate a 512x512 image with 20 steps with any sampler) first try starting with the --opt-split-attention-v1 command line option (i.e. ./webui.sh --opt-split-attention-v1) and see if that helps. If that doesn't make much difference, then open the Activity Monitor application located in /Applications/Utilities and check the memory pressure graph under the Memory tab. If memory pressure is being displayed in red when an image is generated, close the web UI process and then add the --medvram command line option (i.e. ./webui.sh --opt-split-attention-v1 --medvram). If performance is still poor and memory pressure still red with that option, then instead try --lowvram (i.e. ./webui.sh --opt-split-attention-v1 --lowvram). If it still takes more than a few minutes to generate a 512x512 image with 20 steps with with any sampler, then you may need to turn off GPU acceleration. Open webui-user.sh in Xcode and change #export COMMANDLINE_ARGS="" to export COMMANDLINE_ARGS="--skip-torch-cuda-test --no-half --use-cpu all".

[ahemberger]

Hiyo, thanks so much for this! I'm happy to be a tester for this.

I'm trying to get this setup on an M1 Max laptop; I removed a previous version that I'd installed with the "old" instructions (which didn't actually work; I had to do some file editing per this thread, which finally yielded a functional UI session). I removed all of that entirely and re-fetched the repo fresh following the above instructions. When I try to launch the UI now, I get:

Traceback (most recent call last):
  File "/Users/xxxxx/dev/github/stable-diffusion-webui/launch.py", line 295, in <module>
    start()
  File "/Users/xxxxx/dev/github/stable-diffusion-webui/launch.py", line 286, in start
    import webui
  File "/Users/xxxxx/dev/github/stable-diffusion-webui/webui.py", line 11, in <module>
    from modules.call_queue import wrap_queued_call, queue_lock, wrap_gradio_gpu_call
  File "/Users/xxxxx/dev/github/stable-diffusion-webui/modules/call_queue.py", line 7, in <module>
    from modules import shared
  File "/Users/xxxxx/dev/github/stable-diffusion-webui/modules/shared.py", line 12, in <module>
    import modules.interrogate
  File "/Users/xxxxx/dev/github/stable-diffusion-webui/modules/interrogate.py", line 9, in <module>
    from torchvision import transforms
  File "/Users/xxxxx/dev/github/stable-diffusion-webui/venv/lib/python3.10/site-packages/torchvision/__init__.py", line 5, in <module>
    from torchvision import datasets
  File "/Users/xxxxx/dev/github/stable-diffusion-webui/venv/lib/python3.10/site-packages/torchvision/datasets/__init__.py", line 1, in <module>
    from ._optical_flow import KittiFlow, Sintel, FlyingChairs, FlyingThings3D, HD1K
  File "/Users/xxxxx/dev/github/stable-diffusion-webui/venv/lib/python3.10/site-packages/torchvision/datasets/_optical_flow.py", line 13, in <module>
    from .utils import verify_str_arg
  File "/Users/xxxxx/dev/github/stable-diffusion-webui/venv/lib/python3.10/site-packages/torchvision/datasets/utils.py", line 6, in <module>
    import lzma
  File "/Users/xxxxx/.pyenv/versions/3.10.0/lib/python3.10/lzma.py", line 27, in <module>
    from _lzma import *
ModuleNotFoundError: No module named '_lzma'

I'm not sure this is relevant, but: I use Python via pyenv, and currently have it set up to use 3.10.0 (not 3.10.6, as the 'main' instructions suggest, nor 3.10.8, which is what I have working on a separate Windows machine). Would that impact this?

FWIW, prior to this, I also ran into two other issues trying to create TI embeddings, which I mention here.

[pxp291032]

I was getting this error:when I use hire.fix a image, the python begin to withdraw for no apparent reason and the console show a warning "/Library/Developer/CommandLineTools/Library/Frameworks/Python3.framework/Versions/3.9/lib/python3.9/multiprocessing/resource_tracker.py:216: UserWarning: resource_tracker: There appear to be 1 leaked semaphore objects to clean up at shutdown
warnings.warn('resource_tracker: There appear to be %d '". I don't know what to do.

[don1138]

@pxp291032:

I have no notes about the warning you're getting, but I've found in order for Hires.fix work properly, I need to change the COMMANDLINE_ARGS.

Refer to this comment to see my settings. Hope this helps!

[Lscchina]

I got this error too. And i change my model to a small one, and then it worked.

when I use the small model, it worked well. when I use the big model, it crashed.

[stemel]

ModuleNotFoundError: No module named '_lzma' - FIXED

Mac M1 Pro, Mac OS 14.1.2, Python (pyenv) 3.10.6

Couldn't get it to work following
https://github.com/AUTOMATIC1111/stable-diffusion-webui/wiki/Installation-on-Apple-Silicon

On first launch of ./webui.sh kept running into
ModuleNotFoundError: No module named '_lzma'
none of the proposed workarounds/solutions here in this discussion worked.

The one solution that made the application run was:
https://gist.github.com/iandanforth/f3ac42b0963bcbfdf56bb446e9f40a33

brew reinstall xz
pyenv uninstall 3.10.6 # Replace with your version number
pyenv install 3.10.6 # Reinstall (now with the lzma lib available)
pyenv local 3.10.6 # Set this version to always run in this directory
pip install pandas

[ZT-ae86]

Error = Error Domain=com.apple.appleneuralengine Code=6 "createProgramInstanceForModel:modelToken:qos:isPreCompiled:enablePowerSaving:skipPreparePhase:statsMask:memoryPoolID:enableLateLatch:modelIdentityStr:owningPid:cacheUrlIdentifier:aotCacheUrlIdentifier:error:: Program load failure (0x5)" UserInfo={NSLocalizedDescription=createProgramInstanceForModel:modelToken:qos:isPreCompiled:enablePowerSaving:skipPreparePhase:statsMask:memoryPoolID:enableLateLatch:modelIdentityStr:owningPid:cacheUrlIdentifier:aotCacheUrlIdentifier:error:: Program load failure (0x5)}
2024-05-14 14:47:46.347 Python[51352:8930884] ANE load failed!
2024-05-14 14:47:46.347 Python[51352:8930884] Issues were found in compilation, falling back to GPU

What is the situation? After clicking to generate the image, there was no response...

[bbecausereasonss]

I'd say including this is pretty important for Apple Silicon Macs.

https://github.com/apple/ml-stable-diffusion

[philipturner]

Got some useful benchmarks about making one-off images too. For people running Stable Diffusion WebUI on battery, CoreML support is a must (600 -> 130 joules/image). Or even for the climate conscious, reducing emissions from 170 to 40 mg CO2 per image.

apple/ml-stable-diffusion#54 (comment)

[tchr-dev]

Guernika & Mochi Diffusion are good examples!
https://github.com/godly-devotion/MochiDiffusion
https://huggingface.co/Guernika/CoreMLStableDiffusion

I believe it is more easier to use already existing methods

[tchr-dev]

The only downside is that mac os should be latest one - Ventura

[larssn]

Make no mistake, GPU rendering is faster than the neural engine. But it takes up more resources to do so.

I've benchmarked both.

[xu420]

正克隆到 'stable-diffusion-webui'...
remote: Enumerating objects: 31542, done.
remote: Counting objects: 100% (50/50), done.
remote: Compressing objects: 100% (28/28), done.
错误：RPC 失败。curl 92 HTTP/2 stream 5 was not closed cleanly: CANCEL (err 8)
错误：预期仍然需要 6921 个字节的正文
fetch-pack: unexpected disconnect while reading sideband packet
致命错误：过早的文件结束符（EOF）
致命错误：fetch-pack：无效的 index-pack 输出怎么解决

[system1system2]

Much better instructions!
I'd slightly modify point 4, or insert an extra point between 4 and 5:

If you already downloaded one or more Stable Diffusion models, and you are using them across multiple user interfaces (A1111, InvokeAI, etc), you might NOT want to copy the .ckpt files in stable-diffusion-webui/models/Stable-diffusion to avoid duplications and unnecessary consumption of storage.

Instead, you can keep all your models in a separate folder and launch A1111 by adding the --ckpt-dir flag.

For example, if you keep your models in /Users/YourUserName/Desktop/Models, then you can launch A1111 by writing in each of the next steps:
./webui.sh --ckpt-dir "/Users/YourUserName/Desktop/Models/"

Notice that your folder Models can have as many subfolders as you want to keep models organized. A1111 will parse all of them and list all .ckpt in the drop-down menu.

or something like that.

I'm mentioning it only because I've read dozens of comments about people complaining about the space consumption issue.

[ghost]

i have this problem but still have no idea how to fix it

[jrittvo]

Copy or type in here the full path to your Auto1111 /models/stable-diffusion folder, and then also the full path to the folder you want to keep your models in on the external drive. I'll check back here later and give you a command to use that you can just copy and paste into a terminal window on your end to make the symlink mentioned above.

[OrganicBeej]

@jrittvo I would really like to know how to do this also because my space on the main HD is getting very full! Can it be done in the startup ARGS?

Here are my 2 links for the models:

1. Local on iMac: /Users/briancurtis/stable-diffusion-webui/models/Stable-diffusion
2. Link to connected Drive: /Volumes/BEEJ2TB/Sept_Moved_SD_Models/Stable-diffusion

Thanks my friend :)

[jrittvo]

First move or rename the /Users/briancurtis/stable-diffusion-webui/models/Stable-diffusion folder because it will be replaced by the symlink.

Then, in Terminal:

cd /Users/briancurtis/stable-diffusion-webui/models

ln -s /Volumes/BEEJ2TB/Sept_Moved_SD_Models/Stable-diffusion

[OrganicBeej]

@jrittvo Thank You so much! :) This worked perfectly and now I can have ALL them accessible tgether and free-up . . . 200GB (cripes! I didn't realise I had tht many til I put them all tgether! lol) 😮🤪

Been looking for this answer for weeks now. 👍🏻⭐️⭐️⭐️
B

[twopiearr]

Tried doing the "existing installation" instructions and got the following error after running webui.sh:

Fetching updates for K-diffusion...
Checking out commit for K-diffusion with hash: 51c9778f269cedb55a4d88c79c0246d35bdadb71...
Traceback (most recent call last):
  File "/Users/richpizor/stable-diffusion-webui/launch.py", line 294, in <module>
    prepare_enviroment()
  File "/Users/richpizor/stable-diffusion-webui/launch.py", line 239, in prepare_enviroment
    git_clone(k_diffusion_repo, repo_dir('k-diffusion'), "K-diffusion", k_diffusion_commit_hash)
  File "/Users/richpizor/stable-diffusion-webui/launch.py", line 97, in git_clone
    run(f'"{git}" -C {dir} checkout {commithash}', f"Checking out commit for {name} with hash: {commithash}...", f"Couldn't checkout commit {commithash} for {name}")
  File "/Users/richpizor/stable-diffusion-webui/launch.py", line 49, in run
    raise RuntimeError(message)
RuntimeError: Couldn't checkout commit 51c9778f269cedb55a4d88c79c0246d35bdadb71 for K-diffusion.
Command: "git" -C repositories/k-diffusion checkout 51c9778f269cedb55a4d88c79c0246d35bdadb71
Error code: 128
stdout: <empty>
stderr: fatal: reference is not a tree: 51c9778f269cedb55a4d88c79c0246d35bdadb71

Tried deleting the repositories and venv directories as instructred. Response from git pull was "already up to date" and it died in the same place with the same error (not that I expected success at that point).

Completely trashed everything and tried a fresh install. That worked, though I'm still getting the No module 'xformers'. Proceeding without it message.

[luphable]

I'm getting the same error. Will try a fresh install as well.

[ss007k]

I cloned the repo and followed the instructions; however, No module 'xformers'. Proceeding without it, still shows (even after I installed them using python -m pip install -U torch, python -m pip install -U xformers - the torch installation was needed as it could not find torch in my case).

Were any of you able to resolve this issue?

[bobpuffer1]

Xformers doesn't run on macOS.

[ss007k]

Thanks for the info

[twopiearr]

The BIG problem that I'm noticing is that, in a given session, performance degrades incredibly after the first batch. More details here: #5488

[system1system2]

I don't know if it helps, but I run a batch count of 100 every night with the following settings:

• Model: 768-v-ema.ckpt
• Sampler: DDIM
• Steps: 100
• CFG Scale: 9
• Restore face: no
• Seed: -1
• Size: 768x768px
• Batch size: 1

On my MBP M1 Pro with 32GB RAM, these settings in A1111 (last commit) generate a new image approx every 4min.
I leave a bunch of other apps open during the generation: browser, mail client, etc.

Every morning, I check the terminal and every image is within the average. Except for one night, 2 days ago.
Inexplicably, and just that night, a few image generations within the same batch took random time: 17min, 30min, 52min.
I assumed it was some background process subtracting resources from the system, but maybe not?

Other than that, my generations are perfectly regular at approx 4min.

[twopiearr]

Before the 2.0 integration commit, I was getting that level of performance pretty consistently, and I AM STILL getting it pretty consistently in Invoke-AI. I'm consistently getting these incredibly long generation times in Auto for every generation passed the first in a given session.

[twopiearr]

I do notice that this appears to be launching into python 3.9.12, rather than the 3.10.x preferred by Invoke-AI. This is confirmed by observing memory use in Activity Monitor. This is especially odd given that i have confirmed via the brew info command that the Homebrew version of python installed is 3.10 as well. So questions:

• Is it likely that the python version is causing this?
• Whether or not it's likely, how do i install in such a way that it uses Python 3.10?

[twopiearr]

...except for still launching in py 3.9 unless I specify it in the command...i may just have to make a command file at this point.

[twopiearr]

so THIS is odd.

When I run the following command everything launches fine: python_cmd="python3.10" ./webui.sh --opt-split-attention-v1 --medvram

HOWEVER

When I adjust webui-user.sh to introduce the exact same arguments in that command, it errors out with the following:

Traceback (most recent call last):
  File "/Users/richpizor/stable-diffusion-webui/launch.py", line 294, in <module>
    prepare_enviroment()
  File "/Users/richpizor/stable-diffusion-webui/launch.py", line 209, in prepare_enviroment
    run_python("import torch; assert torch.cuda.is_available(), 'Torch is not able to use GPU; add --skip-torch-cuda-test to COMMANDLINE_ARGS variable to disable this check'")
  File "/Users/richpizor/stable-diffusion-webui/launch.py", line 73, in run_python
    return run(f'"{python}" -c "{code}"', desc, errdesc)
  File "/Users/richpizor/stable-diffusion-webui/launch.py", line 49, in run
    raise RuntimeError(message)
RuntimeError: Error running command.
Command: "/opt/homebrew/opt/[email protected]/bin/python3.10" -c "import torch; assert torch.cuda.is_available(), 'Torch is not able to use GPU; add --skip-torch-cuda-test to COMMANDLINE_ARGS variable to disable this check'"
Error code: 1
stdout: <empty>
stderr: Traceback (most recent call last):
  File "<string>", line 1, in <module>
AssertionError: Torch is not able to use GPU; add --skip-torch-cuda-test to COMMANDLINE_ARGS variable to disable this check

[twopiearr]

Seems that adjusting the python_cmd variable doesn't break things, so i've set that to 3.10. But enabling ANYTHING in the COMMANDLINE_ARGS variable causes the above assertion.

[brkirch]

You’ll want to change that line to export COMMANDLINE_ARGS="$COMMANDLINE_ARGS --opt-split-attention-v1" The reason it isn’t working for you to completely override it is because you need to have --skip-torch-cuda-test also.

Also if you’ve updated web UI recently then it automatically sets python_cmd to python3.10 if it’s available, so you don’t need to change it (you can if you want though, doesn’t matter).

[twopiearr]

Huh...did a git pull earlier, so i should be up to date, but it's still defaulting to 3.9. No matter; easy enough to set in the webui_user file.

[neonmik]

Does anyone have any insight into what would cause the errors in the terminal below after launching './webui.sh'?

I'm running a 2021 MacBook Pro 16" (10c/24c w/ 64GB of RAM) on Ventura 13.0.1.

Had one issue before this where I was unable to access "https://github.com/TencentARC/GFPGAN.git/", so I did it manually and then it worked the next time.

Have tried clearing 'repositories' and 'venv' but still getting the same message.

Python 3.10.8 (main, Oct 21 2022, 22:22:30) [Clang 14.0.0 (clang-1400.0.29.202)]
Commit hash: 44c46f0ed395967cd3830dd481a2db759fda5b3b
Installing torch and torchvision
Installing gfpgan
Installing clip
^AInstalling open_clip
åy≈yCloning Stable Diffusion into repositories/stable-diffusion-stability-ai...
Cloning Taming Transformers into repositories/taming-transformers...
Cloning K-diffusion into repositories/k-diffusion...
Cloning CodeFormer into repositories/CodeFormer...
Cloning BLIP into repositories/BLIP...
Installing requirements for CodeFormer
Installing requirements for Web UI
Launching Web UI with arguments: --no-half --use-cpu interrogate
Warning: caught exception 'Torch not compiled with CUDA enabled', memory monitor disabled
No module 'xformers'. Proceeding without it.
LatentDiffusion: Running in eps-prediction mode
DiffusionWrapper has 859.52 M params.
Loading weights [2c02b20a] from /Users/**USER**/stable-diffusion-webui/models/Stable-diffusion/768-v-ema.ckpt
Traceback (most recent call last):
  File "/Users/**USER**/stable-diffusion-webui/launch.py", line 295, in <module>
    start()
  File "/Users/**USER**/stable-diffusion-webui/launch.py", line 290, in start
    webui.webui()
  File "/Users/**USER**/stable-diffusion-webui/webui.py", line 132, in webui
    initialize()
  File "/Users/**USER**/stable-diffusion-webui/webui.py", line 62, in initialize
    modules.sd_models.load_model()
  File "/Users/**USER**/stable-diffusion-webui/modules/sd_models.py", line 261, in load_model
    load_model_weights(sd_model, checkpoint_info)
  File "/Users/**USER**/stable-diffusion-webui/modules/sd_models.py", line 192, in load_model_weights
    model.load_state_dict(sd, strict=False)
  File "/Users/**USER**/stable-diffusion-webui/venv/lib/python3.10/site-packages/torch/nn/modules/module.py", line 1604, in load_state_dict
    raise RuntimeError('Error(s) in loading state_dict for {}:\n\t{}'.format(
RuntimeError: Error(s) in loading state_dict for LatentDiffusion:
	size mismatch for model.diffusion_model.input_blocks.1.1.proj_in.weight: copying a param with shape torch.Size([320, 320]) from checkpoint, the shape in current model is torch.Size([320, 320, 1, 1]).
	size mismatch for model.diffusion_model.input_blocks.1.1.transformer_blocks.0.attn2.to_k.weight: copying a param with shape torch.Size([320, 1024]) from checkpoint, the shape in current model is torch.Size([320, 768]).
	size mismatch for model.diffusion_model.input_blocks.1.1.transformer_blocks.0.attn2.to_v.weight: copying a param with shape torch.Size([320, 1024]) from checkpoint, the shape in current model is torch.Size([320, 768]).
	size mismatch for model.diffusion_model.input_blocks.1.1.proj_out.weight: copying a param with shape torch.Size([320, 320]) from checkpoint, the shape in current model is torch.Size([320, 320, 1, 1]).
	size mismatch for model.diffusion_model.input_blocks.2.1.proj_in.weight: copying a param with shape torch.Size([320, 320]) from checkpoint, the shape in current model is torch.Size([320, 320, 1, 1]).
	size mismatch for model.diffusion_model.input_blocks.2.1.transformer_blocks.0.attn2.to_k.weight: copying a param with shape torch.Size([320, 1024]) from checkpoint, the shape in current model is torch.Size([320, 768]).
	size mismatch for model.diffusion_model.input_blocks.2.1.transformer_blocks.0.attn2.to_v.weight: copying a param with shape torch.Size([320, 1024]) from checkpoint, the shape in current model is torch.Size([320, 768]).
	size mismatch for model.diffusion_model.input_blocks.2.1.proj_out.weight: copying a param with shape torch.Size([320, 320]) from checkpoint, the shape in current model is torch.Size([320, 320, 1, 1]).
	size mismatch for model.diffusion_model.input_blocks.4.1.proj_in.weight: copying a param with shape torch.Size([640, 640]) from checkpoint, the shape in current model is torch.Size([640, 640, 1, 1]).
	size mismatch for model.diffusion_model.input_blocks.4.1.transformer_blocks.0.attn2.to_k.weight: copying a param with shape torch.Size([640, 1024]) from checkpoint, the shape in current model is torch.Size([640, 768]).
	size mismatch for model.diffusion_model.input_blocks.4.1.transformer_blocks.0.attn2.to_v.weight: copying a param with shape torch.Size([640, 1024]) from checkpoint, the shape in current model is torch.Size([640, 768]).
	size mismatch for model.diffusion_model.input_blocks.4.1.proj_out.weight: copying a param with shape torch.Size([640, 640]) from checkpoint, the shape in current model is torch.Size([640, 640, 1, 1]).
	size mismatch for model.diffusion_model.input_blocks.5.1.proj_in.weight: copying a param with shape torch.Size([640, 640]) from checkpoint, the shape in current model is torch.Size([640, 640, 1, 1]).
	size mismatch for model.diffusion_model.input_blocks.5.1.transformer_blocks.0.attn2.to_k.weight: copying a param with shape torch.Size([640, 1024]) from checkpoint, the shape in current model is torch.Size([640, 768]).
	size mismatch for model.diffusion_model.input_blocks.5.1.transformer_blocks.0.attn2.to_v.weight: copying a param with shape torch.Size([640, 1024]) from checkpoint, the shape in current model is torch.Size([640, 768]).
	size mismatch for model.diffusion_model.input_blocks.5.1.proj_out.weight: copying a param with shape torch.Size([640, 640]) from checkpoint, the shape in current model is torch.Size([640, 640, 1, 1]).
	size mismatch for model.diffusion_model.input_blocks.7.1.proj_in.weight: copying a param with shape torch.Size([1280, 1280]) from checkpoint, the shape in current model is torch.Size([1280, 1280, 1, 1]).
	size mismatch for model.diffusion_model.input_blocks.7.1.transformer_blocks.0.attn2.to_k.weight: copying a param with shape torch.Size([1280, 1024]) from checkpoint, the shape in current model is torch.Size([1280, 768]).
	size mismatch for model.diffusion_model.input_blocks.7.1.transformer_blocks.0.attn2.to_v.weight: copying a param with shape torch.Size([1280, 1024]) from checkpoint, the shape in current model is torch.Size([1280, 768]).
	size mismatch for model.diffusion_model.input_blocks.7.1.proj_out.weight: copying a param with shape torch.Size([1280, 1280]) from checkpoint, the shape in current model is torch.Size([1280, 1280, 1, 1]).
	size mismatch for model.diffusion_model.input_blocks.8.1.proj_in.weight: copying a param with shape torch.Size([1280, 1280]) from checkpoint, the shape in current model is torch.Size([1280, 1280, 1, 1]).
	size mismatch for model.diffusion_model.input_blocks.8.1.transformer_blocks.0.attn2.to_k.weight: copying a param with shape torch.Size([1280, 1024]) from checkpoint, the shape in current model is torch.Size([1280, 768]).
	size mismatch for model.diffusion_model.input_blocks.8.1.transformer_blocks.0.attn2.to_v.weight: copying a param with shape torch.Size([1280, 1024]) from checkpoint, the shape in current model is torch.Size([1280, 768]).
	size mismatch for model.diffusion_model.input_blocks.8.1.proj_out.weight: copying a param with shape torch.Size([1280, 1280]) from checkpoint, the shape in current model is torch.Size([1280, 1280, 1, 1]).
	size mismatch for model.diffusion_model.middle_block.1.proj_in.weight: copying a param with shape torch.Size([1280, 1280]) from checkpoint, the shape in current model is torch.Size([1280, 1280, 1, 1]).
	size mismatch for model.diffusion_model.middle_block.1.transformer_blocks.0.attn2.to_k.weight: copying a param with shape torch.Size([1280, 1024]) from checkpoint, the shape in current model is torch.Size([1280, 768]).
	size mismatch for model.diffusion_model.middle_block.1.transformer_blocks.0.attn2.to_v.weight: copying a param with shape torch.Size([1280, 1024]) from checkpoint, the shape in current model is torch.Size([1280, 768]).
	size mismatch for model.diffusion_model.middle_block.1.proj_out.weight: copying a param with shape torch.Size([1280, 1280]) from checkpoint, the shape in current model is torch.Size([1280, 1280, 1, 1]).
	size mismatch for model.diffusion_model.output_blocks.3.1.proj_in.weight: copying a param with shape torch.Size([1280, 1280]) from checkpoint, the shape in current model is torch.Size([1280, 1280, 1, 1]).
	size mismatch for model.diffusion_model.output_blocks.3.1.transformer_blocks.0.attn2.to_k.weight: copying a param with shape torch.Size([1280, 1024]) from checkpoint, the shape in current model is torch.Size([1280, 768]).
	size mismatch for model.diffusion_model.output_blocks.3.1.transformer_blocks.0.attn2.to_v.weight: copying a param with shape torch.Size([1280, 1024]) from checkpoint, the shape in current model is torch.Size([1280, 768]).
	size mismatch for model.diffusion_model.output_blocks.3.1.proj_out.weight: copying a param with shape torch.Size([1280, 1280]) from checkpoint, the shape in current model is torch.Size([1280, 1280, 1, 1]).
	size mismatch for model.diffusion_model.output_blocks.4.1.proj_in.weight: copying a param with shape torch.Size([1280, 1280]) from checkpoint, the shape in current model is torch.Size([1280, 1280, 1, 1]).
	size mismatch for model.diffusion_model.output_blocks.4.1.transformer_blocks.0.attn2.to_k.weight: copying a param with shape torch.Size([1280, 1024]) from checkpoint, the shape in current model is torch.Size([1280, 768]).
	size mismatch for model.diffusion_model.output_blocks.4.1.transformer_blocks.0.attn2.to_v.weight: copying a param with shape torch.Size([1280, 1024]) from checkpoint, the shape in current model is torch.Size([1280, 768]).
	size mismatch for model.diffusion_model.output_blocks.4.1.proj_out.weight: copying a param with shape torch.Size([1280, 1280]) from checkpoint, the shape in current model is torch.Size([1280, 1280, 1, 1]).
	size mismatch for model.diffusion_model.output_blocks.5.1.proj_in.weight: copying a param with shape torch.Size([1280, 1280]) from checkpoint, the shape in current model is torch.Size([1280, 1280, 1, 1]).
	size mismatch for model.diffusion_model.output_blocks.5.1.transformer_blocks.0.attn2.to_k.weight: copying a param with shape torch.Size([1280, 1024]) from checkpoint, the shape in current model is torch.Size([1280, 768]).
	size mismatch for model.diffusion_model.output_blocks.5.1.transformer_blocks.0.attn2.to_v.weight: copying a param with shape torch.Size([1280, 1024]) from checkpoint, the shape in current model is torch.Size([1280, 768]).
	size mismatch for model.diffusion_model.output_blocks.5.1.proj_out.weight: copying a param with shape torch.Size([1280, 1280]) from checkpoint, the shape in current model is torch.Size([1280, 1280, 1, 1]).
	size mismatch for model.diffusion_model.output_blocks.6.1.proj_in.weight: copying a param with shape torch.Size([640, 640]) from checkpoint, the shape in current model is torch.Size([640, 640, 1, 1]).
	size mismatch for model.diffusion_model.output_blocks.6.1.transformer_blocks.0.attn2.to_k.weight: copying a param with shape torch.Size([640, 1024]) from checkpoint, the shape in current model is torch.Size([640, 768]).
	size mismatch for model.diffusion_model.output_blocks.6.1.transformer_blocks.0.attn2.to_v.weight: copying a param with shape torch.Size([640, 1024]) from checkpoint, the shape in current model is torch.Size([640, 768]).
	size mismatch for model.diffusion_model.output_blocks.6.1.proj_out.weight: copying a param with shape torch.Size([640, 640]) from checkpoint, the shape in current model is torch.Size([640, 640, 1, 1]).
	size mismatch for model.diffusion_model.output_blocks.7.1.proj_in.weight: copying a param with shape torch.Size([640, 640]) from checkpoint, the shape in current model is torch.Size([640, 640, 1, 1]).
	size mismatch for model.diffusion_model.output_blocks.7.1.transformer_blocks.0.attn2.to_k.weight: copying a param with shape torch.Size([640, 1024]) from checkpoint, the shape in current model is torch.Size([640, 768]).
	size mismatch for model.diffusion_model.output_blocks.7.1.transformer_blocks.0.attn2.to_v.weight: copying a param with shape torch.Size([640, 1024]) from checkpoint, the shape in current model is torch.Size([640, 768]).
	size mismatch for model.diffusion_model.output_blocks.7.1.proj_out.weight: copying a param with shape torch.Size([640, 640]) from checkpoint, the shape in current model is torch.Size([640, 640, 1, 1]).
	size mismatch for model.diffusion_model.output_blocks.8.1.proj_in.weight: copying a param with shape torch.Size([640, 640]) from checkpoint, the shape in current model is torch.Size([640, 640, 1, 1]).
	size mismatch for model.diffusion_model.output_blocks.8.1.transformer_blocks.0.attn2.to_k.weight: copying a param with shape torch.Size([640, 1024]) from checkpoint, the shape in current model is torch.Size([640, 768]).
	size mismatch for model.diffusion_model.output_blocks.8.1.transformer_blocks.0.attn2.to_v.weight: copying a param with shape torch.Size([640, 1024]) from checkpoint, the shape in current model is torch.Size([640, 768]).
	size mismatch for model.diffusion_model.output_blocks.8.1.proj_out.weight: copying a param with shape torch.Size([640, 640]) from checkpoint, the shape in current model is torch.Size([640, 640, 1, 1]).
	size mismatch for model.diffusion_model.output_blocks.9.1.proj_in.weight: copying a param with shape torch.Size([320, 320]) from checkpoint, the shape in current model is torch.Size([320, 320, 1, 1]).
	size mismatch for model.diffusion_model.output_blocks.9.1.transformer_blocks.0.attn2.to_k.weight: copying a param with shape torch.Size([320, 1024]) from checkpoint, the shape in current model is torch.Size([320, 768]).
	size mismatch for model.diffusion_model.output_blocks.9.1.transformer_blocks.0.attn2.to_v.weight: copying a param with shape torch.Size([320, 1024]) from checkpoint, the shape in current model is torch.Size([320, 768]).
	size mismatch for model.diffusion_model.output_blocks.9.1.proj_out.weight: copying a param with shape torch.Size([320, 320]) from checkpoint, the shape in current model is torch.Size([320, 320, 1, 1]).
	size mismatch for model.diffusion_model.output_blocks.10.1.proj_in.weight: copying a param with shape torch.Size([320, 320]) from checkpoint, the shape in current model is torch.Size([320, 320, 1, 1]).
	size mismatch for model.diffusion_model.output_blocks.10.1.transformer_blocks.0.attn2.to_k.weight: copying a param with shape torch.Size([320, 1024]) from checkpoint, the shape in current model is torch.Size([320, 768]).
	size mismatch for model.diffusion_model.output_blocks.10.1.transformer_blocks.0.attn2.to_v.weight: copying a param with shape torch.Size([320, 1024]) from checkpoint, the shape in current model is torch.Size([320, 768]).
	size mismatch for model.diffusion_model.output_blocks.10.1.proj_out.weight: copying a param with shape torch.Size([320, 320]) from checkpoint, the shape in current model is torch.Size([320, 320, 1, 1]).
	size mismatch for model.diffusion_model.output_blocks.11.1.proj_in.weight: copying a param with shape torch.Size([320, 320]) from checkpoint, the shape in current model is torch.Size([320, 320, 1, 1]).
	size mismatch for model.diffusion_model.output_blocks.11.1.transformer_blocks.0.attn2.to_k.weight: copying a param with shape torch.Size([320, 1024]) from checkpoint, the shape in current model is torch.Size([320, 768]).
	size mismatch for model.diffusion_model.output_blocks.11.1.transformer_blocks.0.attn2.to_v.weight: copying a param with shape torch.Size([320, 1024]) from checkpoint, the shape in current model is torch.Size([320, 768]).
	size mismatch for model.diffusion_model.output_blocks.11.1.proj_out.weight: copying a param with shape torch.Size([320, 320]) from checkpoint, the shape in current model is torch.Size([320, 320, 1, 1]).

Edited for format

[brkirch]

I found the problem, if you don't provide the option "--config " then it will use the old ./v1-inference.yaml in the project root which is not compatible with the 2.0 models.

Actually no, --config is not required.

Putting the config file in the same folder as the model did not work for me (reading through the code I don't see how it could work for anybody else either...)

stable-diffusion-webui/modules/sd_models.py

Line 81 in 0376da1

config = basename + ".yaml"

You might have a hidden extension on the file so it looks like the renamed file has the yaml extension when it still has an additional extension on it (e.g. Finder might show 768-v-ema.yaml when the actual filename is 768-v-ema.yaml.yml)

[antoncic]

You are completely right. I missed the config= base name + ".yaml" line and made the (stupid?) assumption that .yaml and .yml should both be interpreted as YAML files but that was not apparently the not case. Thanks for making this clear. Have now changed .yml to .yaml

[calvinballing]

I had this issue, and while my configuration file only had one extension on it, I had downloaded it as a .yml file, and needed to rename it to be a .yaml file.

[qiuqiuX]

I use someone else's ckpt file , but not yaml is provided, I use the top yaml link but got same issue above, what can I do

[elisezhu123]

it seemed your model is not wor, you can only use ckpt or safesensors

[joshdance]

Just followed this guide today and everything worked great.

One note, I installed homebrew fresh, but I didn't have next steps for adding Homebrew to my PATH. Perhaps I had already done that previously with homebrew.

[elisezhu123]

just put it in your .zshrc file
eval "$(/opt/homebrew/bin/brew shellenv)"

[christiaan2b]

What does it mean to just put it in your .zshrc file? Do we just copy paste this into terminal?
eval "$(/opt/homebrew/bin/brew shellenv)"

[joshdance]

Tried training an embedding and it fails instantly.

Get this error in the terminal:

Traceback (most recent call last):
File "/Users/username/Stable Diffusion/stable-diffusion-webui/modules/textual_inversion/textual_inversion.py", line 315, in train_embedding
scheduler.apply(optimizer, embedding.step)
File "/Users/username/Stable Diffusion/stable-diffusion-webui/modules/textual_inversion/learn_schedule.py", line 62, in apply
if step_number < self.end_step:
TypeError: '<' not supported between instances of 'NoneType' and 'int'

[Aervinn]

I hope someone would explain how it goes after launching the web and try training in hyper network and see how it goes. I don't see anyone who gets past that, there's no reference in YouTube or anywhere

[twopiearr]

See, I had just sort of assumed that this one of those bits that Don't Work On Mac. Though if this relies on xformers I would expect it to fail, as I'm reasonably sure the modular code needed hasn't been translated yet.

[Aervinn]

do you know of anyone who had this running completely functional. I'm past the installation, I could do text to image function but the main feature which is train images it failed and I'm stuck. so far I could only see people on YouTube running it on windows

[twopiearr]

In fact, I do not.

[brkirch]

@Aervinn @twopiearr

From my reply below:

I've put in a PR (#5810) to address the issues with training, if that gets merged then give it another try. Just be warned that you likely need more than 32 GB of RAM for training to work correctly. If you have 64 GB of RAM or more, it will probably work fine. Performace doesn't actually seem too bad right now (2 to 3 sec/it), and I'm not entirely sure why because it was horrible when I tried it about a month ago with the same version of PyTorch (~25 sec/it IIRC).

Training is indeed broken at this time, but the PR should address that.

[PFC-developer]

so I removed my old install, and started afresh.
the first message I saw was

Can't run without a checkpoint. Find and place a .ckpt file into any of those locations. The program will exit.

so I went over to hugging face, and tried to find one...
I downloaded this one - https://huggingface.co/stabilityai/stable-diffusion-2/tree/main and put it in the Stable-diffusion folder.

now I get

RuntimeError: Error(s) in loading state_dict for LatentDiffusion:
	size mismatch for model.diffusion_model.input_blocks.1.1.proj_in.weight: copying a param with shape torch.Size([320, 320]) from checkpoint, the shape in current model is torch.Size([320, 320, 1, 1]).
	size mismatch for model.diffusion_model.input_blocks.1.1.transformer_blocks.0.attn2.to_k.weight: copying a param with shape torch.Size([320, 1024]) from checkpoint, the shape in current model is torch.Size([320, 768]).
	size mismatch for model.diffusion_model.input_blocks.1.1.transformer_blocks.0.attn2.to_v.weight: copying a param with shape torch.Size([320, 1024]) from checkpoint, the shape in current model is torch.Size([320, 768]).

I got similar issues with the 2.1 model.
it would be great if you update the document to help with where to download the models from, and any extra config

[neonmik]

I’m assuming that’s the same as my issue?

This reply from @brkirch fixed it:

You need the model’s configuration file (768-v-ema.yaml) in the same folder as 768-v-ema.ckpt. Download https://raw.githubusercontent.com/Stability-AI/stablediffusion/main/configs/stable-diffusion/v2-inference-v.yaml, rename it to 768-v-ema.yaml, and put it in the same folder as 768-v-ema.ckpt.

[PFC-developer]

I am indeed. Thank you.

[tianzhuang55]

failed on step 5, after run ./webui.sh

log as following:

Using legacy 'setup.py install' for gfpgan, since package 'wheel' is not installed.
Using legacy 'setup.py install' for basicsr, since package 'wheel' is not installed.
Using legacy 'setup.py install' for lmdb, since package 'wheel' is not installed.
Using legacy 'setup.py install' for filterpy, since package 'wheel' is not installed.
Using legacy 'setup.py install' for future, since package 'wheel' is not installed.
Installing collected packages: yapf, tensorboard-plugin-wit, pyasn1, lmdb, addict, wheel, tqdm, tifffile, tensorboard-data-server, six, scipy, rsa, pyyaml, PyWavelets, pyparsing, pyasn1-modules, protobuf, packaging, opencv-python, oauthlib, networkx, MarkupSafe, markdown, llvmlite, kiwisolver, imageio, future, fonttools, cycler, contourpy, cachetools, absl-py, werkzeug, scikit-image, requests-oauthlib, python-dateutil, numba, grpcio, google-auth, matplotlib, google-auth-oauthlib, tb-nightly, filterpy, facexlib, basicsr, gfpgan
Running setup.py install for lmdb: started
Running setup.py install for lmdb: finished with status 'error'

stderr: Running command git clone --filter=blob:none --quiet https://github.com/TencentARC/GFPGAN.git /private/var/folders/d_/nz3s4q253752_l7h14mcc6cc0000gn/T/pip-req-build-8moh8ytq
Running command git rev-parse -q --verify 'sha^8d2447a2d918f8eba5a4a01463fd48e45126a379'
Running command git fetch -q https://github.com/TencentARC/GFPGAN.git 8d2447a2d918f8eba5a4a01463fd48e45126a379
Running command git checkout -q 8d2447a2d918f8eba5a4a01463fd48e45126a379
error: subprocess-exited-with-error

× Running setup.py install for lmdb did not run successfully.
│ exit code: 1
╰─> [25 lines of output]
py-lmdb: Using bundled liblmdb with py-lmdb patches; override with LMDB_FORCE_SYSTEM=1 or LMDB_PURE=1.
patching file lmdb.h
patching file mdb.c
py-lmdb: Using CPython extension; override with LMDB_FORCE_CFFI=1.
running install
/Users/tian/stable-diffusion-webui/venv/lib/python3.10/site-packages/setuptools/command/install.py:34: SetuptoolsDeprecationWarning: setup.py install is deprecated. Use build and pip and other standards-based tools.
warnings.warn(
running build
running build_py
creating build/lib.macosx-13-arm64-cpython-310
creating build/lib.macosx-13-arm64-cpython-310/lmdb
copying lmdb/cffi.py -> build/lib.macosx-13-arm64-cpython-310/lmdb
copying lmdb/init.py -> build/lib.macosx-13-arm64-cpython-310/lmdb
copying lmdb/_config.py -> build/lib.macosx-13-arm64-cpython-310/lmdb
copying lmdb/tool.py -> build/lib.macosx-13-arm64-cpython-310/lmdb
copying lmdb/main.py -> build/lib.macosx-13-arm64-cpython-310/lmdb
running build_ext
building 'cpython' extension
creating build/temp.macosx-13-arm64-cpython-310
creating build/temp.macosx-13-arm64-cpython-310/build
creating build/temp.macosx-13-arm64-cpython-310/build/lib
creating build/temp.macosx-13-arm64-cpython-310/lmdb
clang -Wno-unused-result -Wsign-compare -Wunreachable-code -fno-common -dynamic -DNDEBUG -g -fwrapv -O3 -Wall -Ilib/py-lmdb -Ibuild/lib -I/Users/tian/stable-diffusion-webui/venv/include -I/opt/homebrew/opt/[email protected]/Frameworks/Python.framework/Versions/3.10/include/python3.10 -c build/lib/mdb.c -o build/temp.macosx-13-arm64-cpython-310/build/lib/mdb.o -DHAVE_PATCHED_LMDB=1 -UNDEBUG -w
xcrun: error: unable to load libxcrun (dlopen(/Library/Developer/CommandLineTools/usr/lib/libxcrun.dylib, 0x0005): tried: '/Library/Developer/CommandLineTools/usr/lib/libxcrun.dylib' (mach-o file, but is an incompatible architecture (have 'x86_64', need '')), '/System/Volumes/Preboot/Cryptexes/OS/Library/Developer/CommandLineTools/usr/lib/libxcrun.dylib' (no such file), '/Library/Developer/CommandLineTools/usr/lib/libxcrun.dylib' (mach-o file, but is an incompatible architecture (have 'x86_64', need ''))).
error: command '/usr/bin/clang' failed with exit code 1
[end of output]

note: This error originates from a subprocess, and is likely not a problem with pip.
error: legacy-install-failure

× Encountered error while trying to install package.
╰─> lmdb

note: This is an issue with the package mentioned above, not pip.
hint: See above for output from the failure.

[brkirch]

It looks like there is a problem with your Xcode command line tools. Make sure Xcode is up to date in the App Store and then check Software Update in System Preferences or System Settings (whichever you have) to make sure you have all available software updates installed.

[tianzhuang55]

Hi, I reinstall my Xcode, and it works now. Thanks so much!

[Orncal-three]

I also encountered such a problem, does this have anything to do with the system version?

[lorentsob]

I am experiencing the same issue and have not yet figured out how to resolve it. When you mention that the problem may be related to XCode, what exactly do you mean? I have not utilized XCode to install the web-ui and am not familiar with it. What should I do to solve the lmdb package error? Could someone please help me? (I am a newbie, so please be polite)

[liuxudonger]

The real problem is "xcrun: error: unable to load libxcrun (dlopen(/Library/Developer/CommandLineTools/usr/lib/libxcrun.dylib, 0x0005): tried: ", this is related to Xcode tools, so I try the command "xcode-select --install", that works for me.

[shubhamgupta0406]

I am a completely non-technical person (a product manager) and I want to try out the tool to generate various images. I am wondering if anyone can provide instructions in layman's language with all (ALL, really) steps involved. I'd be more than happy to test, then create a document with screenshots and add various guides to the product.

[joshdance]

If you are completely non-technical the easiest way to run Stable Diffusion would be to download DiffusionBee - https://joshdance.medium.com/how-to-run-stable-diffusion-on-an-m1-mac-a95185907289 - it is a standalone application, nothing to tweak, just enter commands in the text box and makes images.

[elisezhu123]

i have chinese version of video about installation but for english version of guide no idea maybe you can find on on youtube teach you how to use

[krummrey]

Maybe include the patch for k_diffusion to get more samplers working.

[brkirch]

A k-diffusion fork based on Birch-san's k-diffusion fork is used for exactly that. Other than the PLMS sampler not working correctly with Stable Diffusion 2.0/2.1 models (this is also the case when running via CPU also so it may not be a Mac specific issue), all samplers should work correctly.

[Weird-Fishes]

I'm using MacOS 12.6.1
Managed to get to the step ./webui.sh then the auto dependency download becomes a disaster.
It always seems to get stuck for a few minutes when installing gfpgan then displaying the following message.

Python 3.10.8 (main, Oct 13 2022, 09:48:40) [Clang 14.0.0 (clang-1400.0.29.102)]
Commit hash: 685f9631b56ff8bd43bce24ff5ce0f9a0e9af490
Installing gfpgan
Traceback (most recent call last):
  File "/Users/***/stable-diffusion-webui/launch.py", line 294, in <module>
    prepare_environment()
  File "/Users/***/stable-diffusion-webui/launch.py", line 212, in prepare_environment
    run_pip(f"install {gfpgan_package}", "gfpgan")
  File "/Users/***/stable-diffusion-webui/launch.py", line 78, in run_pip
    return run(f'"{python}" -m pip {args} --prefer-binary{index_url_line}', desc=f"Installing {desc}", errdesc=f"Couldn't install {desc}")
  File "/Users/***/stable-diffusion-webui/launch.py", line 49, in run
    raise RuntimeError(message)
RuntimeError: Couldn't install gfpgan.
Command: "/Users/***/stable-diffusion-webui/venv/bin/python3.10" -m pip install git+https://github.com/TencentARC/GFPGAN.git@8d2447a2d918f8eba5a4a01463fd48e45126a379 --prefer-binary
Error code: 1
stdout: Collecting git+https://github.com/TencentARC/GFPGAN.git@8d2447a2d918f8eba5a4a01463fd48e45126a379
  Cloning https://github.com/TencentARC/GFPGAN.git (to revision 8d2447a2d918f8eba5a4a01463fd48e45126a379) to /private/var/folders/90/t9l7qzm964n_mk0p_ltvg35h0000gn/T/pip-req-build-tic45oxo

stderr:   Running command git clone --filter=blob:none --quiet https://github.com/TencentARC/GFPGAN.git /private/var/folders/90/t9l7qzm964n_mk0p_ltvg35h0000gn/T/pip-req-build-tic45oxo
  fatal: unable to access 'https://github.com/TencentARC/GFPGAN.git/': Empty reply from server
  error: subprocess-exited-with-error
  
  × git clone --filter=blob:none --quiet https://github.com/TencentARC/GFPGAN.git /private/var/folders/90/t9l7qzm964n_mk0p_ltvg35h0000gn/T/pip-req-build-tic45oxo did not run successfully.
  │ exit code: 128
  ╰─> See above for output.
  
  note: This error originates from a subprocess, and is likely not a problem with pip.
error: subprocess-exited-with-error

× git clone --filter=blob:none --quiet https://github.com/TencentARC/GFPGAN.git /private/var/folders/90/t9l7qzm964n_mk0p_ltvg35h0000gn/T/pip-req-build-tic45oxo did not run successfully.
│ exit code: 128
╰─> See above for output.

note: This error originates from a subprocess, and is likely not a problem with pip.

[notice] A new release of pip available: 22.2.2 -> 22.3.1
[notice] To update, run: pip install --upgrade pip

Even after successful installation of gfpgan, it will be stuck on clip, then open_clip (if clip fortunately installs, probably 1 our of 5 times).
I live in China so I suspect this has to do with the firewall messing with my connection with GitHub... tried messing with hosts to no avail.
At this point I'm close to giving up. Is anyone having similar issues? Is there a way for me to manually install these dependencies?

[azuredean]

请问绕过防火墙的代码在安装sd的终端页面直接输入吗？我试了下还是失败了。
希望有小伙伴告知如何实操，感谢🙏

[elisezhu123]

请问这种UI是必须全程挂梯子才有用吗？我这里好像退出VPN就error了

yes, in china need vpn or clashxpro with enhance mode

[HaoWillSi]

请问这种UI是必须全程挂梯子才有用吗？我这里好像退出VPN就error了

yes, in china need vpn or clashxpro with enhance mode

Got it, thanks a lot!

[HaoWillSi]

请问绕过防火墙的代码在安装sd的终端页面直接输入吗？我试了下还是失败了。 希望有小伙伴告知如何实操，感谢🙏

我一开始按照层主的http.proxy方法也不行，后来重置代理后改为指定GitHub就可以了，
git config --global http.https://github.com.proxy socks5://127.0.0.1:XXXX，
其中XXXX改成你的socks端口码，你可以试试

[xu6chen]

请问绕过防火墙的代码在安装sd的终端页面直接输入吗？我试了下还是失败了。 希望有小伙伴告知如何实操，感谢🙏

我一开始按照层主的http.proxy方法也不行，后来重置代理后改为指定GitHub就可以了， git config --global http.https://github.com.proxy socks5://127.0.0.1:XXXX， 其中XXXX改成你的socks端口码，你可以试试

works! thanks a lot!

[wobba]

I get the following issue on my M1 as for some reason where venv installs x86 packages while python and arch is set to "ARM64". Any pointers on cleaning up or making the environment work on M1 for arm64? Somehow install the missing arm64 version of the crypto lib.

/opt/homebrew/bin/python3 is architecture: arm64

Launching Web UI with arguments: --no-half --use-cpu interrogate
Traceback (most recent call last):
  File "/Users/miksvenson/repos/stable-diffusion-webui/launch.py", line 295, in <module>
    start()
  File "/Users/miksvenson/repos/stable-diffusion-webui/launch.py", line 286, in start
    import webui
  File "/Users/miksvenson/repos/stable-diffusion-webui/webui.py", line 11, in <module>
    from modules.call_queue import wrap_queued_call, queue_lock, wrap_gradio_gpu_call
  File "/Users/miksvenson/repos/stable-diffusion-webui/modules/call_queue.py", line 7, in <module>
    from modules import shared
  File "/Users/miksvenson/repos/stable-diffusion-webui/modules/shared.py", line 8, in <module>
    import gradio as gr
  File "/Users/miksvenson/repos/stable-diffusion-webui/venv/lib/python3.10/site-packages/gradio/__init__.py", line 3, in <module>
    import gradio.components as components
  File "/Users/miksvenson/repos/stable-diffusion-webui/venv/lib/python3.10/site-packages/gradio/components.py", line 31, in <module>
    from gradio import media_data, processing_utils, utils
  File "/Users/miksvenson/repos/stable-diffusion-webui/venv/lib/python3.10/site-packages/gradio/processing_utils.py", line 20, in <module>
    from gradio import encryptor, utils
  File "/Users/miksvenson/repos/stable-diffusion-webui/venv/lib/python3.10/site-packages/gradio/encryptor.py", line 2, in <module>
    from Crypto.Cipher import AES
  File "/Users/miksvenson/repos/stable-diffusion-webui/venv/lib/python3.10/site-packages/Crypto/Cipher/__init__.py", line 27, in <module>
    from Crypto.Cipher._mode_ecb import _create_ecb_cipher
  File "/Users/miksvenson/repos/stable-diffusion-webui/venv/lib/python3.10/site-packages/Crypto/Cipher/_mode_ecb.py", line 35, in <module>
    raw_ecb_lib = load_pycryptodome_raw_lib("Crypto.Cipher._raw_ecb", """
  File "/Users/miksvenson/repos/stable-diffusion-webui/venv/lib/python3.10/site-packages/Crypto/Util/_raw_api.py", line 309, in load_pycryptodome_raw_lib
    raise OSError("Cannot load native module '%s': %s" % (name, ", ".join(attempts)))
OSError: Cannot load native module 'Crypto.Cipher._raw_ecb': Not found '_raw_ecb.cpython-310-darwin.so', Cannot load '_raw_ecb.abi3.so': cannot load library '/Users/miksvenson/repos/stable-diffusion-webui/venv/lib/python3.10/site-packages/Crypto/Util/../Cipher/_raw_ecb.abi3.so': dlopen(/Users/miksvenson/repos/stable-diffusion-webui/venv/lib/python3.10/site-packages/Crypto/Util/../Cipher/_raw_ecb.abi3.so, 0x0002): tried: '/Users/miksvenson/repos/stable-diffusion-webui/venv/lib/python3.10/site-packages/Crypto/Util/../Cipher/_raw_ecb.abi3.so' (mach-o file, but is an incompatible architecture (have 'x86_64', need 'arm64')), '/System/Volumes/Preboot/Cryptexes/OS/Users/miksvenson/repos/stable-diffusion-webui/venv/lib/python3.10/site-packages/Crypto/Util/../Cipher/_raw_ecb.abi3.so' (no such file), '/Users/miksvenson/repos/stable-diffusion-webui/venv/lib/python3.10/site-packages/Crypto/Util/../Cipher/_raw_ecb.abi3.so' (mach-o file, but is an incompatible architecture (have 'x86_64', need 'arm64')), '/Users/miksvenson/repos/stable-diffusion-webui/venv/lib/python3.10/site-packages/Crypto/Cipher/_raw_ecb.abi3.so' (mach-o file, but is an incompatible architecture (have 'x86_64', need 'arm64')), '/System/Volumes/Preboot/Cryptexes/OS/Users/miksvenson/repos/stable-diffusion-webui/venv/lib/python3.10/site-packages/Crypto/Cipher/_raw_ecb.abi3.so' (no such file), '/Users/miksvenson/repos/stable-diffusion-webui/venv/lib/python3.10/site-packages/Crypto/Cipher/_raw_ecb.abi3.so' (mach-o file, but is an incompatible architecture (have 'x86_64', need 'arm64')).  Additionally, ctypes.util.find_library() did not manage to locate a library called '/Users/miksvenson/repos/stable-diffusion-webui/venv/lib/python3.10/site-packages/Crypto/Util/../Cipher/_raw_ecb.abi3.so', Not found '_raw_ecb.so'

[IQbert]

Got the same error, but this didn't solve my error. Anybody?
Her is my terminal output:
File "/Users/home/stable-diffusion-webui/launch.py", line 317, in
start()
File "/Users/home/stable-diffusion-webui/launch.py", line 308, in start
import webui
File "/Users/home/stable-diffusion-webui/webui.py", line 13, in
from modules.call_queue import wrap_queued_call, queue_lock, wrap_gradio_gpu_call
File "/Users/home/stable-diffusion-webui/modules/call_queue.py", line 7, in
from modules import shared, progress
File "/Users/home/stable-diffusion-webui/modules/shared.py", line 9, in
import gradio as gr
File "/Users/home/stable-diffusion-webui/venv/lib/python3.10/site-packages/gradio/init.py", line 3, in
import gradio.components as components
File "/Users/home/stable-diffusion-webui/venv/lib/python3.10/site-packages/gradio/components.py", line 34, in
from gradio import media_data, processing_utils, utils
File "/Users/home/stable-diffusion-webui/venv/lib/python3.10/site-packages/gradio/processing_utils.py", line 23, in
from gradio import encryptor, utils
File "/Users/home/stable-diffusion-webui/venv/lib/python3.10/site-packages/gradio/encryptor.py", line 2, in
from Crypto.Cipher import AES
File "/Users/home/stable-diffusion-webui/venv/lib/python3.10/site-packages/Crypto/Cipher/init.py", line 27, in
from Crypto.Cipher._mode_ecb import _create_ecb_cipher
File "/Users/home/stable-diffusion-webui/venv/lib/python3.10/site-packages/Crypto/Cipher/_mode_ecb.py", line 35, in
raw_ecb_lib = load_pycryptodome_raw_lib("Crypto.Cipher._raw_ecb", """
File "/Users/home/stable-diffusion-webui/venv/lib/python3.10/site-packages/Crypto/Util/_raw_api.py", line 309, in load_pycryptodome_raw_lib
raise OSError("Cannot load native module '%s': %s" % (name, ", ".join(attempts)))
OSError: Cannot load native module 'Crypto.Cipher._raw_ecb': Not found '_raw_ecb.cpython-310-darwin.so', Cannot load '_raw_ecb.abi3.so': dlopen(/Users/home/stable-diffusion-webui/venv/lib/python3.10/site-packages/Crypto/Util/../Cipher/_raw_ecb.abi3.so, 0x0006): tried: '/Users/home/stable-diffusion-webui/venv/lib/python3.10/site-packages/Crypto/Util/../Cipher/_raw_ecb.abi3.so' (mach-o file, but is an incompatible architecture (have (x86_64), need (arm64e))), '/Users/home/stable-diffusion-webui/venv/lib/python3.10/site-packages/Crypto/Cipher/_raw_ecb.abi3.so' (mach-o file, but is an incompatible architecture (have (x86_64), need (arm64e))), Not found '_raw_ecb.so'

[homurahomu1]

It says it there; “is an incompatible architecture (have (x86_64), need (arm64e)))” at the bottom

[ShMcK]

Same issue. As suggested, clearing the cache and reinstalling didn't work for me, either.

It seems like a gradio dependency (pycryptodome) is either:

• not compatible OR
• incorrectly installed using the x86 version, not arm64
  Related: Gradio and M1 macbook gradio-app/gradio#1940.

As suggested in the issue, I configured Conda and ran:

pip uninstall pycryptodome
conda install pycryptodome

But no luck. Thank you world ahead of time for any help on this one!

[brkirch]

To those with this issue: do you have Xcode installed? I suspect there is a problem with the build environment that is preventing pip from building the required wheel, but it is a bit hard to tell why exactly it isn't simply giving an error message when first trying to install pycryptodome instead of installing the wrong wheel. If it really is just pycryptodome that is the problem, then this wheel can be used:
pycryptodome-3.16.0-cp35-abi3-macosx_13_0_arm64.whl.zip
Unzipping that file onto the desktop and running sh -c 'source venv/bin/activate; pip uninstall pycryptodome; pip install ~/Desktop/pycryptodome-3.16.0-cp35-abi3-macosx_13_0_arm64.whl' from the stable-diffusion-webui directory should install a working pycryptodome package.

[tilmanginzel]

Thanks a lot @brkirch, replacing the wheel manually as you proposed fixed the issue. The UI starts just fine now (MacBook Air M1, MacOS 13.1).

do you have Xcode installed?

Yes, Xcode is installed.

[christiaan2b]

I'm stuck at step 1, where it says "Keep the terminal window open and follow the instructions under "Next steps" to add Homebrew to your PATH."

There were no instructions under "Next steps". I've installed on Apple Silicon Mac.

[christiaan2b]

Thanks, I didn't get the instruction. I don't know why because I haven't installed Homebrew on this machine before.

Anyway, I've managed to get to the point where I've installed everything and am running the webUI, but when I try a prompt I get this error:

URLError: <urlopen error [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: unable to get local issuer certificate (_ssl.c:997)>

[viking1304]

Run this command and post the output:

system_profiler SPHardwareDataType | head -n 12 && echo "" && system_profiler SPDisplaysDataType && sw_vers

Double-check if your serial is displayed in the output and REMOVE IT before posting!

I am not 100% sure if other macOS versions have the same display format as the last one, but the serial should not be in the first 12 lines of SPHardwareDataType output.

Also, post the result of this command:

echo -e "\nInstalled python versions:";for v in {10..12}; do if command -v python3."${v}" &> /dev/null;then python_version="$(python3."${v}" --version)";python_path="$(which python3."${v}")";echo -e "  \033[34m${python_version#*[[:space:]]}\033[0m: ${python_path}";fi;done;if command -v python3 &> /dev/null;then p3="$(python3 --version)";echo -e "\nDefault Python version: \033[34m${p3#*[[:space:]]}\033[0m";fi

[christiaan2b]

There was no serial number 👍🏼

Hardware:

    Hardware Overview:

      Model Name: MacBook Pro
      Model Identifier: Mac14,6
      Model Number: Z176000C4B/A
      Chip: Apple M2 Max
      Total Number of Cores: 12 (8 performance and 4 efficiency)
      Memory: 96 GB
      System Firmware Version: 10151.121.1
      OS Loader Version: 10151.121.1

Graphics/Displays:

    Apple M2 Max:

      Chipset Model: Apple M2 Max
      Type: GPU
      Bus: Built-In
      Total Number of Cores: 38
      Vendor: Apple (0x106b)
      Metal Support: Metal 3
      Displays:
        Color LCD:
          Display Type: Built-in Liquid Retina XDR Display
          Resolution: 3456 x 2234 Retina
          Main Display: Yes
          Mirror: Off
          Online: Yes
          Automatically Adjust Brightness: Yes
          Connection Type: Internal

ProductName:		macOS
ProductVersion:		14.5
BuildVersion:		23F79

Installed python versions:
3.10.6: /usr/local/bin/python3.10
3.12.3: /opt/homebrew/bin/python3.12

Default Python version: 3.10.6

[viking1304]

EDIT:

Please do this first:

❯ which brew

If it shows /usr/local/bin/brew and not /opt/homebrew/bin/brew, you probably run rosetta2 before installing brew, which is completely wrong. In that case, you need to remove the Intel version of brew first.

I just realized that /usr/local/bin/python3.10 is the location where brew for Intel installs python 3.10, but it is possible that you used some

--

Try to uninstall Python 3.10.6 located in /usr/local/bin/python3.10 first, then install 3.10.14 using brew install [email protected]

Remove venv folder which is located in stable-diffusion-webui folder and run ./webui.sh. That will create a new venv for you and hopefully solve the problem with certs.

Or, you can just uninstall Python 3.10.6 and run my script, which will do all the rest for you automatically.

[christiaan2b]

Brilliant, thanks so much for your help!

[amlos91]

Hi everyone, webui consistently fails to start on a new insrtall, did everything in the tutorial, twice
Here is the log

Installing requirements
Launching Web UI with arguments: --skip-torch-cuda-test --upcast-sampling --no-half-vae --use-cpu interrogate
no module 'xformers'. Processing without...
no module 'xformers'. Processing without...
Traceback (most recent call last):
File "/Users/borisvian/stablediffusion/stable-diffusion-webui/launch.py", line 48, in
main()
File "/Users/borisvian/stablediffusion/stable-diffusion-webui/launch.py", line 44, in main
start()
File "/Users/borisvian/stablediffusion/stable-diffusion-webui/modules/launch_utils.py", line 465, in start
import webui
File "/Users/borisvian/stablediffusion/stable-diffusion-webui/webui.py", line 13, in
initialize.imports()
File "/Users/borisvian/stablediffusion/stable-diffusion-webui/modules/initialize.py", line 26, in imports
from modules import paths, timer, import_hook, errors # noqa: F401
File "/Users/borisvian/stablediffusion/stable-diffusion-webui/modules/paths.py", line 60, in
import sgm # noqa: F401
File "/Users/borisvian/stablediffusion/stable-diffusion-webui/repositories/generative-models/sgm/init.py", line 1, in
from .models import AutoencodingEngine, DiffusionEngine
File "/Users/borisvian/stablediffusion/stable-diffusion-webui/repositories/generative-models/sgm/models/init.py", line 1, in
from .autoencoder import AutoencodingEngine
File "/Users/borisvian/stablediffusion/stable-diffusion-webui/repositories/generative-models/sgm/models/autoencoder.py", line 12, in
from ..modules.diffusionmodules.model import Decoder, Encoder
File "/Users/borisvian/stablediffusion/stable-diffusion-webui/repositories/generative-models/sgm/modules/init.py", line 1, in
from .encoders.modules import GeneralConditioner
File "/Users/borisvian/stablediffusion/stable-diffusion-webui/repositories/generative-models/sgm/modules/encoders/modules.py", line 22, in
from ...modules.diffusionmodules.model import Encoder
File "/Users/borisvian/stablediffusion/stable-diffusion-webui/repositories/generative-models/sgm/modules/diffusionmodules/init.py", line 6, in
from .sampling import BaseDiffusionSampler
File "/Users/borisvian/stablediffusion/stable-diffusion-webui/repositories/generative-models/sgm/modules/diffusionmodules/sampling.py", line 12, in
from ...modules.diffusionmodules.sampling_utils import (
File "/Users/borisvian/stablediffusion/stable-diffusion-webui/repositories/generative-models/sgm/modules/diffusionmodules/sampling_utils.py", line 2, in
from scipy import integrate
File "/Users/borisvian/stablediffusion/stable-diffusion-webui/venv/lib/python3.10/site-packages/scipy/init.py", line 134, in getattr
return _importlib.import_module(f'scipy.{name}')
File "/opt/homebrew/Cellar/[email protected]/3.10.14/Frameworks/Python.framework/Versions/3.10/lib/python3.10/importlib/init.py", line 126, in import_module
return _bootstrap._gcd_import(name[level:], package, level)
File "/Users/borisvian/stablediffusion/stable-diffusion-webui/venv/lib/python3.10/site-packages/scipy/integrate/init.py", line 94, in
from ._quadrature import *
File "/Users/borisvian/stablediffusion/stable-diffusion-webui/venv/lib/python3.10/site-packages/scipy/integrate/_quadrature.py", line 9, in
from scipy.special import roots_legendre
File "/Users/borisvian/stablediffusion/stable-diffusion-webui/venv/lib/python3.10/site-packages/scipy/special/init.py", line 777, in
from . import _ufuncs
ImportError: dlopen(/Users/borisvian/stablediffusion/stable-diffusion-webui/venv/lib/python3.10/site-packages/scipy/special/_ufuncs.cpython-310-darwin.so, 2): Symbol not found: _cephes_Gamma
Referenced from: /Users/borisvian/stablediffusion/stable-diffusion-webui/venv/lib/python3.10/site-packages/scipy/special/_ufuncs.cpython-310-darwin.so
Expected in: flat namespace
in /Users/borisvian/stablediffusion/stable-diffusion-webui/venv/lib/python3.10/site-packages/scipy/special/_ufuncs.cpython-310-darwin.so

[viking1304]

Please do this.

[amlos91]

Sorry about that, I thought you specified to double check if it was in there to make sure I sent it, what can be done with my mac's serial?

Hardware:

    Hardware Overview:

      Model Name: MacBook Air
      Model Identifier: MacBookAir10,1
      Chip: Apple M1
      Total Number of Cores: 8 (4 performance and 4 efficiency)
      Memory: 8 GB
      System Firmware Version: 6723.140.2
      OS Loader Version: 6723.140.2

Graphics/Displays:

    Apple M1:

      Chipset Model: Apple M1
      Type: GPU
      Bus: Built-In
      Total Number of Cores: 7
      Vendor: Apple (0x106b)
      Metal Family: Supported, Metal GPUFamily Apple 7
      Displays:
        Color LCD:
          Resolution: 2880 x 1800
          UI Looks like: 1440 x 900 @ 60.00Hz
          Main Display: Yes
          Mirror: Off
          Online: Yes
          Automatically Adjust Brightness: No
          Connection Type: Internal

Installed python versions:
  3.10.14: /opt/homebrew/bin/python3.10
  3.12.3: /opt/homebrew/bin/python3.12

Default Python version: 3.12.3

[viking1304]

I am very sorry I was not clear enough. I updated my original post. It is usually not a big deal. Theoretically, Apple can block iMessage on your Mac if someone uses your serial with Hackintosh, but chances for that are almost none. I would avoid posting that info publicly anyway, and I do not want people to think I intentionally made them send their serials.

You have brew and python3.10 properly installed, so this error is strange.

I do not see your macOS version (even though it should be displayed in the output of the command I sent), so please post this too:

sw_vers

You must update your macOS if it is lower than 12.3.

If your macOS is newer, you can try my step-by-step guide or simply run my script, which will do all for you automatically.

[JSVJ]

Hi, I am trying to install this repository in my MacBook Air M2. I cloned, downloaded the model from here (https://huggingface.co/stabilityai/stable-diffusion-3-medium) and copied the model in the stability-diffusion folder for checkpoints. While running ./web-ui.sh I am always getting this error.

Python 3.12.3 (v3.12.3:f6650f9ad7, Apr  9 2024, 08:18:47) [Clang 13.0.0 (clang-1300.0.29.30)]
Version: v1.9.4
Commit hash: feee37d75f1b168768014e4634dcb156ee649c05
Installing torch and torchvision
ERROR: Could not find a version that satisfies the requirement torch==2.1.0 (from versions: 2.2.0, 2.2.1, 2.2.2, 2.3.0, 2.3.1)
ERROR: No matching distribution found for torch==2.1.0

I know this repository has been built on 3.10 but I tried to use 3.12. However, it shows errors while installing PyTorch and I am not sure where to change this PyTorch configuration. Kindly help me :)

[JSVJ]

FYI - For MacOS Sonoma - I added this latest versions in the web-ui.sh file
export TORCH_COMMAND="pip install torch==2.3.1 torchvision==0.18.1" and it works.

[viking1304]

Please use 3.10 since that is recommended Python version for A1111 on Mac. My PR has been merged, so it will be included in next release. It will install torch 2.3.0 on ARM Macs. SD3 support is still in testing but I have no information if it will be part of the next release or not.

I just check change log for 2.3.1, so I will try to submit a new PR soon.

MPS:
Fix data corruption when coping large (>4GiB) tensors (pytorch/pytorch#124635)
Fix Tensor.abs() for complex (pytorch/pytorch#125662)

I need to test 2.3.1 properly before I submit that PR.

[DDC3344]

这是来自QQ邮箱的假期自动回复邮件。   您好，您的邮件已收到。我会在考到消息后第一时间回复您。若内容紧要，请电话通知我，以免耽误！谢谢！

[bayhe]

I'm using MacOS 14.5
Managed to get to the step ./webui.sh then the auto dependency download becomes a disaster.
It always seems to get stuck for a few minutes when installing gfpgan then displaying the following message.
warning: variable does not need to be mutable
--> tokenizers-lib/src/models/unigram/model.rs:265:21
|
265 | let mut target_node = &mut best_path_ends_at[key_pos];
| ----^^^^^^^^^^^
| |
| help: remove this mut
|
= note: #[warn(unused_mut)] on by default

  warning: variable does not need to be mutable
     --> tokenizers-lib/src/models/unigram/model.rs:282:21
      |
  282 |                 let mut target_node = &mut best_path_ends_at[starts_at + mblen];
      |                     ----^^^^^^^^^^^
      |                     |
      |                     help: remove this `mut`

  warning: variable does not need to be mutable
     --> tokenizers-lib/src/pre_tokenizers/byte_level.rs:200:59
      |
  200 |     encoding.process_tokens_with_offsets_mut(|(i, (token, mut offsets))| {
      |                                                           ----^^^^^^^
      |                                                           |
      |                                                           help: remove this `mut`

  error: casting `&T` to `&mut T` is undefined behavior, even if the reference is unused, consider instead using an `UnsafeCell`
     --> tokenizers-lib/src/models/bpe/trainer.rs:526:47
      |
  522 |                     let w = &words[*i] as *const _ as *mut _;
      |                             -------------------------------- casting happend here
  ...
  526 |                         let word: &mut Word = &mut (*w);
      |                                               ^^^^^^^^^
      |
      = note: for more information, visit <https://doc.rust-lang.org/book/ch15-05-interior-mutability.html>
      = note: `#[deny(invalid_reference_casting)]` on by default

  warning: `tokenizers` (lib) generated 3 warnings
  error: could not compile `tokenizers` (lib) due to 1 previous error; 3 warnings emitted

  Caused by:
    process didn't exit successfully: `/Users/bayhe/.rustup/toolchains/stable-x86_64-apple-darwin/bin/rustc --crate-name tokenizers --edition=2018 tokenizers-lib/src/lib.rs --error-format=json --json=diagnostic-rendered-ansi,artifacts,future-incompat --crate-type lib --emit=dep-info,metadata,link -C opt-level=3 -C embed-bitcode=no --cfg 'feature="cached-path"' --cfg 'feature="clap"' --cfg 'feature="cli"' --cfg 'feature="default"' --cfg 'feature="dirs"' --cfg 'feature="esaxx_fast"' --cfg 'feature="http"' --cfg 'feature="indicatif"' --cfg 'feature="onig"' --cfg 'feature="progressbar"' --cfg 'feature="reqwest"' -C metadata=3b56116cb7d28e4e -C extra-filename=-3b56116cb7d28e4e --out-dir /private/var/folders/8_/hzpg5ddj4b73p4qkq03xv08w0000gn/T/pip-install-lm8lky09/tokenizers_78bb9c12755f4e21876e42a11d1161bd/target/release/deps -C strip=debuginfo -L dependency=/private/var/folders/8_/hzpg5ddj4b73p4qkq03xv08w0000gn/T/pip-install-lm8lky09/tokenizers_78bb9c12755f4e21876e42a11d1161bd/target/release/deps --extern aho_corasick=/private/var/folders/8_/hzpg5ddj4b73p4qkq03xv08w0000gn/T/pip-install-lm8lky09/tokenizers_78bb9c12755f4e21876e42a11d1161bd/target/release/deps/libaho_corasick-f2121eaad07e1da9.rmeta --extern cached_path=/private/var/folders/8_/hzpg5ddj4b73p4qkq03xv08w0000gn/T/pip-install-lm8lky09/tokenizers_78bb9c12755f4e21876e42a11d1161bd/target/release/deps/libcached_path-686ebc4aed57628f.rmeta --extern clap=/private/var/folders/8_/hzpg5ddj4b73p4qkq03xv08w0000gn/T/pip-install-lm8lky09/tokenizers_78bb9c12755f4e21876e42a11d1161bd/target/release/deps/libclap-0482e0e2ec940f6a.rmeta --extern derive_builder=/private/var/folders/8_/hzpg5ddj4b73p4qkq03xv08w0000gn/T/pip-install-lm8lky09/tokenizers_78bb9c12755f4e21876e42a11d1161bd/target/release/deps/libderive_builder-9c483c90207feb85.rmeta --extern dirs=/private/var/folders/8_/hzpg5ddj4b73p4qkq03xv08w0000gn/T/pip-install-lm8lky09/tokenizers_78bb9c12755f4e21876e42a11d1161bd/target/release/deps/libdirs-eb720cc9f373a459.rmeta --extern esaxx_rs=/private/var/folders/8_/hzpg5ddj4b73p4qkq03xv08w0000gn/T/pip-install-lm8lky09/tokenizers_78bb9c12755f4e21876e42a11d1161bd/target/release/deps/libesaxx_rs-c11a1e1f6f84e7b8.rmeta --extern getrandom=/private/var/folders/8_/hzpg5ddj4b73p4qkq03xv08w0000gn/T/pip-install-lm8lky09/tokenizers_78bb9c12755f4e21876e42a11d1161bd/target/release/deps/libgetrandom-49682abfc035ad79.rmeta --extern indicatif=/private/var/folders/8_/hzpg5ddj4b73p4qkq03xv08w0000gn/T/pip-install-lm8lky09/tokenizers_78bb9c12755f4e21876e42a11d1161bd/target/release/deps/libindicatif-32f05fdd066867a5.rmeta --extern itertools=/private/var/folders/8_/hzpg5ddj4b73p4qkq03xv08w0000gn/T/pip-install-lm8lky09/tokenizers_78bb9c12755f4e21876e42a11d1161bd/target/release/deps/libitertools-68b219beb42b5ae2.rmeta --extern lazy_static=/private/var/folders/8_/hzpg5ddj4b73p4qkq03xv08w0000gn/T/pip-install-lm8lky09/tokenizers_78bb9c12755f4e21876e42a11d1161bd/target/release/deps/liblazy_static-e6022603780086c5.rmeta --extern log=/private/var/folders/8_/hzpg5ddj4b73p4qkq03xv08w0000gn/T/pip-install-lm8lky09/tokenizers_78bb9c12755f4e21876e42a11d1161bd/target/release/deps/liblog-6d18cc6b2bf3241b.rmeta --extern macro_rules_attribute=/private/var/folders/8_/hzpg5ddj4b73p4qkq03xv08w0000gn/T/pip-install-lm8lky09/tokenizers_78bb9c12755f4e21876e42a11d1161bd/target/release/deps/libmacro_rules_attribute-abad8be0d4723f47.rmeta --extern monostate=/private/var/folders/8_/hzpg5ddj4b73p4qkq03xv08w0000gn/T/pip-install-lm8lky09/tokenizers_78bb9c12755f4e21876e42a11d1161bd/target/release/deps/libmonostate-82919c5752b6df75.rmeta --extern onig=/private/var/folders/8_/hzpg5ddj4b73p4qkq03xv08w0000gn/T/pip-install-lm8lky09/tokenizers_78bb9c12755f4e21876e42a11d1161bd/target/release/deps/libonig-01162798a6f8ebe5.rmeta --extern paste=/private/var/folders/8_/hzpg5ddj4b73p4qkq03xv08w0000gn/T/pip-install-lm8lky09/tokenizers_78bb9c12755f4e21876e42a11d1161bd/target/release/deps/libpaste-c62514dfda758ec3.dylib --extern rand=/private/var/folders/8_/hzpg5ddj4b73p4qkq03xv08w0000gn/T/pip-install-lm8lky09/tokenizers_78bb9c12755f4e21876e42a11d1161bd/target/release/deps/librand-79d25ea5508fc8f8.rmeta --extern rayon=/private/var/folders/8_/hzpg5ddj4b73p4qkq03xv08w0000gn/T/pip-install-lm8lky09/tokenizers_78bb9c12755f4e21876e42a11d1161bd/target/release/deps/librayon-f1ab30199cee89cd.rmeta --extern rayon_cond=/private/var/folders/8_/hzpg5ddj4b73p4qkq03xv08w0000gn/T/pip-install-lm8lky09/tokenizers_78bb9c12755f4e21876e42a11d1161bd/target/release/deps/librayon_cond-962e3be22f28c0ee.rmeta --extern regex=/private/var/folders/8_/hzpg5ddj4b73p4qkq03xv08w0000gn/T/pip-install-lm8lky09/tokenizers_78bb9c12755f4e21876e42a11d1161bd/target/release/deps/libregex-b978c26d90bafb00.rmeta --extern regex_syntax=/private/var/folders/8_/hzpg5ddj4b73p4qkq03xv08w0000gn/T/pip-install-lm8lky09/tokenizers_78bb9c12755f4e21876e42a11d1161bd/target/release/deps/libregex_syntax-b0b37ec730b7eff0.rmeta --extern reqwest=/private/var/folders/8_/hzpg5ddj4b73p4qkq03xv08w0000gn/T/pip-install-lm8lky09/tokenizers_78bb9c12755f4e21876e42a11d1161bd/target/release/deps/libreqwest-1d1bab95eec9f8cc.rmeta --extern serde=/private/var/folders/8_/hzpg5ddj4b73p4qkq03xv08w0000gn/T/pip-install-lm8lky09/tokenizers_78bb9c12755f4e21876e42a11d1161bd/target/release/deps/libserde-a5876712f0ac1a56.rmeta --extern serde_json=/private/var/folders/8_/hzpg5ddj4b73p4qkq03xv08w0000gn/T/pip-install-lm8lky09/tokenizers_78bb9c12755f4e21876e42a11d1161bd/target/release/deps/libserde_json-b298227f142760c3.rmeta --extern spm_precompiled=/private/var/folders/8_/hzpg5ddj4b73p4qkq03xv08w0000gn/T/pip-install-lm8lky09/tokenizers_78bb9c12755f4e21876e42a11d1161bd/target/release/deps/libspm_precompiled-c6bf16861e7474c8.rmeta --extern thiserror=/private/var/folders/8_/hzpg5ddj4b73p4qkq03xv08w0000gn/T/pip-install-lm8lky09/tokenizers_78bb9c12755f4e21876e42a11d1161bd/target/release/deps/libthiserror-10b8593c7d690b1d.rmeta --extern unicode_normalization_alignments=/private/var/folders/8_/hzpg5ddj4b73p4qkq03xv08w0000gn/T/pip-install-lm8lky09/tokenizers_78bb9c12755f4e21876e42a11d1161bd/target/release/deps/libunicode_normalization_alignments-60e594e5a4ae7456.rmeta --extern unicode_segmentation=/private/var/folders/8_/hzpg5ddj4b73p4qkq03xv08w0000gn/T/pip-install-lm8lky09/tokenizers_78bb9c12755f4e21876e42a11d1161bd/target/release/deps/libunicode_segmentation-bdd041fc650cc8e0.rmeta --extern unicode_categories=/private/var/folders/8_/hzpg5ddj4b73p4qkq03xv08w0000gn/T/pip-install-lm8lky09/tokenizers_78bb9c12755f4e21876e42a11d1161bd/target/release/deps/libunicode_categories-7d33312ac673795c.rmeta -L native=/private/var/folders/8_/hzpg5ddj4b73p4qkq03xv08w0000gn/T/pip-install-lm8lky09/tokenizers_78bb9c12755f4e21876e42a11d1161bd/target/release/build/bzip2-sys-457a4582acde308b/out/lib -L native=/private/var/folders/8_/hzpg5ddj4b73p4qkq03xv08w0000gn/T/pip-install-lm8lky09/tokenizers_78bb9c12755f4e21876e42a11d1161bd/target/release/build/zstd-sys-78fa6ecab7c42d83/out -L native=/private/var/folders/8_/hzpg5ddj4b73p4qkq03xv08w0000gn/T/pip-install-lm8lky09/tokenizers_78bb9c12755f4e21876e42a11d1161bd/target/release/build/esaxx-rs-aa7cf9b038c87515/out -L native=/private/var/folders/8_/hzpg5ddj4b73p4qkq03xv08w0000gn/T/pip-install-lm8lky09/tokenizers_78bb9c12755f4e21876e42a11d1161bd/target/release/build/onig_sys-ed31d8db1c2ce589/out` (exit status: 1)
  error: `cargo rustc --lib --message-format=json-render-diagnostics --manifest-path Cargo.toml --release -v --features pyo3/extension-module --crate-type cdylib -- -C 'link-args=-undefined dynamic_lookup -Wl,-install_name,@rpath/tokenizers.cpython-312-darwin.so'` failed with code 101
  [end of output]

note: This error originates from a subprocess, and is likely not a problem with pip.
ERROR: Failed building wheel for tokenizers
ERROR: ERROR: Failed to build installable wheels for some pyproject.toml based projects (Pillow, tokenizers)

[viking1304]

#5461 (reply in thread)

[getPokemon]

When I tried to use the command ./webui.sh, the following error message appeared:

ERROR: Could not install packages due to an OSError: HTTPSConnectionPool(host='files.pythonhosted.org', port=443): Max retries exceeded with url: /packages/ab/6a/0debe1ec3c63b1fd7487ec7dd8fb1adf19898bef5a8dc151265d79ffd915/torch-2.1.0-cp310-none-macosx_11_0_arm64.whl (Caused by ProxyError('Cannot connect to proxy.', RemoteDisconnected('Remote end closed connection without response')))

Command: "/Users/huaiwanju/workfile/stable-diffusion-webui/venv/bin/python3.10" -m pip install torch==2.1.0 torchvision==0.16.0

Here is a part of the error message.

I tried using a mirror, upgrading pip, changing the DNS, but all of them failed.

I think this is not caused by network issues.

Has anyone encountered such an issue?

[viking1304]

Based on the error, you cannot access https://files.pythonhosted.org/
When Python installs packages, it needs access to that site to get files.

I heard that people from some regions cannot access it directly and that they need to use a proxy or VPN. Can you open that link in your browser?

[kbqncf]

install the torch package, manually

[getPokemon]

我的浏览器不能打开这个链接，不过我通过浏览器上的vpn插件可以打开，我并不确定这个VPN能否对命令行的安装生效

…

------------------&nbsp;原始邮件&nbsp;------------------ 发件人: ***@***.***&gt;; 发送时间: 2024年7月4日(星期四) 下午4:55 收件人: ***@***.***&gt;; 抄送: "No Color ***@***.***&gt;; ***@***.***&gt;; 主题: Re: [AUTOMATIC1111/stable-diffusion-webui] New instructions for running web UI on macOS (check here for macOS related issues) (Discussion #5461) 基于该错误，您无法访问https://files.pythonhosted.org/ 当Python安装包时，它需要访问该站点以获取文件。 我听说有些地区的人不能直接访问，需要使用代理或VPN。你能用浏览器打开那个链接吗？ - 直接回复这封邮件，在GitHub上查看，或取消订阅. ***@***.***&gt;

[zzzshide]

Can anyone help? I am on my Macbook air M2 with MacOS14.5, when running webui.sh, could open the browser interface, but cannot load the model, and terminal shows as below, and my model is "v1-5-pruned-emaonly.ckpt".

Stable diffusion model failed to load
*** Error completing request
*** Arguments: ('task(az7xp6n0tlnahcl)', <gradio.routes.Request object at 0x16d4a50f0>, 'a dog', '', [], 1, 1, 7, 512, 512, False, 0.7, 2, 'Latent', 0, 0, 0, 'Use same checkpoint', 'Use same sampler', 'Use same scheduler', '', '', [], 0, 20, 'DPM++ 2M', 'Automatic', False, '', 0.8, -1, False, -1, 0, 0, 0, False, False, 'positive', 'comma', 0, False, False, 'start', '', 1, '', [], 0, '', [], 0, '', [], True, False, False, False, False, False, False, 0, False) {}
Traceback (most recent call last):
File "/Users/willjin/stable-diffusion-webui/modules/call_queue.py", line 57, in f
res = list(func(*args, **kwargs))
File "/Users/willjin/stable-diffusion-webui/modules/call_queue.py", line 36, in f
res = func(*args, **kwargs)
File "/Users/willjin/stable-diffusion-webui/modules/txt2img.py", line 109, in txt2img
processed = processing.process_images(p)
File "/Users/willjin/stable-diffusion-webui/modules/processing.py", line 832, in process_images
sd_models.reload_model_weights()
File "/Users/willjin/stable-diffusion-webui/modules/sd_models.py", line 860, in reload_model_weights
sd_model = reuse_model_from_already_loaded(sd_model, checkpoint_info, timer)
File "/Users/willjin/stable-diffusion-webui/modules/sd_models.py", line 793, in reuse_model_from_already_loaded
send_model_to_cpu(sd_model)
File "/Users/willjin/stable-diffusion-webui/modules/sd_models.py", line 662, in send_model_to_cpu
if m.lowvram:
AttributeError: 'NoneType' object has no attribute 'lowvram'

---

[zzzshide]

I removed everything in model folder and the venv folder, and ran webui according to your code, it created a new vevn and opened the interface in browser, but did not download v1-5-pruned-emaonly.safetensors for me, the model folder is empty. terminal shows these info:

`Downloading: "https://huggingface.co/runwayml/stable-diffusion-v1-5/resolve/main/v1-5-pruned-emaonly.safetensors" to /Users/willjin/stable-diffusion-webui/models/Stable-diffusion/v1-5-pruned-emaonly.safetensors

loading stable diffusion model: FileNotFoundError
Traceback (most recent call last):
File "/opt/homebrew/Cellar/[email protected]/3.10.14/Frameworks/Python.framework/Versions/3.10/lib/python3.10/threading.py", line 973, in _bootstrap
self._bootstrap_inner()
File "/opt/homebrew/Cellar/[email protected]/3.10.14/Frameworks/Python.framework/Versions/3.10/lib/python3.10/threading.py", line 1016, in _bootstrap_inner
self.run()
File "/opt/homebrew/Cellar/[email protected]/3.10.14/Frameworks/Python.framework/Versions/3.10/lib/python3.10/threading.py", line 953, in run
self._target(*self._args, **self._kwargs)
File "/Users/willjin/stable-diffusion-webui/modules/initialize.py", line 149, in load_model
shared.sd_model # noqa: B018
File "/Users/willjin/stable-diffusion-webui/modules/shared_items.py", line 175, in sd_model
return modules.sd_models.model_data.get_sd_model()
File "/Users/willjin/stable-diffusion-webui/modules/sd_models.py", line 620, in get_sd_model
load_model()
File "/Users/willjin/stable-diffusion-webui/modules/sd_models.py", line 691, in load_model
checkpoint_info = checkpoint_info or select_checkpoint()
File "/Users/willjin/stable-diffusion-webui/modules/sd_models.py", line 224, in select_checkpoint
raise FileNotFoundError(error_message)
FileNotFoundError: No checkpoints found. When searching for checkpoints, looked at:

• file /Users/willjin/stable-diffusion-webui/model.ckpt
• directory /Users/willjin/stable-diffusion-webui/models/Stable-diffusionCan't run without a checkpoint. Find and place a .ckpt or .safetensors file into any of those locations.

Stable diffusion model failed to load
Applying attention optimization: sub-quadratic... done.
Running on local URL: http://127.0.0.1:7860`

[viking1304]

Can you try to rename your current installation to something like stable-diffusion-webui-bkp

Then download the latest version of my installation script and run it with sh a1111-setup.sh

Is there any difference?

[zzzshide]

when i run with sh a1111-setup.sh, entering the installation process and then an error is displayed: ERROR: SHA256 mismatch

[viking1304]

It looks like you are having connection issues with GitHub. The script applied the first three patches without problems but didn't download the last file correctly.

After the script downloads and applies that last fix, it will start webui.sh, which should take care of everything else.

Just re-run my script until you see this:

FIXES

Applying patch: Set recommended command line args for Macs with 16 GB or more of RAM
COMMANDLINE_ARGS="--skip-torch-cuda-test --opt-sub-quad-attention --upcast-sampling --no-half-vae --use-cpu interrogate"

Starting a1111

################################################################
Install script for stable-diffusion + Web UI
Tested on Debian 11 (Bullseye), Fedora 34+ and openSUSE Leap 15.4 or newer.
################################################################

If a1111 also fails to download some stuff, re-run ./webui.sh.

[viking1304]

@zzzshide please download and try a1111-setup v0.2.3. I added a few more patches (#15600 and #15602) from 1.10-RC, which might help your case.

[DDC3344]

这是来自QQ邮箱的假期自动回复邮件。   您好，您的邮件已收到。我会在考到消息后第一时间回复您。若内容紧要，请电话通知我，以免耽误！谢谢！

[OrganicBeej]

GM Everyone :)

Been away from my iMac M1 for some months due to illness. Back to it and updated Ventura to Sonoma today. Decided to use Pinokio for one-click install of A1111 and all seems to have gone OK. Thought that would be a good idea as I tried running my version that worked fine on Ventura and nope - no go!

So, just wondering: Is there anything I now need to change in the webui-user file now I have Sonoma installed? This was my previous args:

export COMMANDLINE_ARGS="--medvram-sdxl --precision full --skip-torch-cuda-test --upcast-sampling --no-half-vae --use-cpu interrogate --ckpt '/Volumes/BEEJ/Sept_Moved_SD_Models/Stable-diffusion/dreamshaper_7.safetensors'"

This is how it currently looks in the new install for webui-user.sh

Commandline arguments for webui.py, for example: export COMMANDLINE_ARGS="--medvram --opt-split-attention"

export COMMANDLINE_ARGS="--no-download-sd-model --skip-torch-cuda-test --upcast-sampling --use-cpu interrogate --no-half --api"

I need to spend a few hours today re-downloading extensions to this latest download and sorting VAE's & models etc.
Here is the version info at the bottom of screen:

version: v1.10.1  •  python: 3.10.15  •  torch: 2.3.1  •  xformers: N/A  •  gradio: 3.41.2  •  checkpoint: [31e35c80fc]

Also, do I need to change anything in Settings>Stable Diffusion?

Any help would be really appreciated so Thank You :)

[DDC3344]

这是来自QQ邮箱的假期自动回复邮件。   您好，您的邮件已收到。我会在考到消息后第一时间回复您。若内容紧要，请电话通知我，以免耽误！谢谢！

[TalkBackJohnny]

MacBook Pro M3 - macOS 15

webui fails to run

Installing torch and torchvision
ERROR: Could not find a version that satisfies the requirement torch==2.3.1 (from versions: 1.11.0, 1.12.0, 1.12.1, 1.13.0, 1.13.1, 2.0.0, 2.0.1, 2.1.0, 2.1.1, 2.1.2, 2.2.0, 2.2.1, 2.2.2)
ERROR: No matching distribution found for torch==2.3.1
Traceback (most recent call last):
File "/Users/jbrooksii/Downloads/oobabooga/stable-diffusion-webui/launch.py", line 48, in
main()
File "/Users/jbrooksii/Downloads/oobabooga/stable-diffusion-webui/launch.py", line 39, in main
prepare_environment()
File "/Users/jbrooksii/Downloads/oobabooga/stable-diffusion-webui/modules/launch_utils.py", line 381, in prepare_environment
run(f'"{python}" -m {torch_command}', "Installing torch and torchvision", "Couldn't install torch", live=True)
File "/Users/jbrooksii/Downloads/oobabooga/stable-diffusion-webui/modules/launch_utils.py", line 116, in run
raise RuntimeError("\n".join(error_bits))
RuntimeError: Couldn't install torch.
Command: "/Users/jbrooksii/Downloads/oobabooga/stable-diffusion-webui/venv/bin/python" -m pip install torch==2.3.1 torchvision==0.18.1
Error code: 1

[KaizerHanz]

@viking1304

here log console from Terminal (from default and test folder)

LOG Console SDA1111.txt

is that correct? if you need more info just tell me, thanks

[viking1304]

@KaizerHanz have you got a proper image with CPU only? When I had issues with 14.4 and 14.5, I could always get a proper image with CPU only. Can you please post screenshot of UI, where I can see the result image and parameters you used? What happen if you do something basic like using 512x768, DPM++ SDE Karras, 20 steps, CFG 7 with a model like Dream Shaper 8 ?

EDIT - please check the SHA256 of your model. Default model should have this hash:
❯ shasum -a 256 v1-5-pruned-emaonly.safetensors
6ce0161689b3853acaa03779ec93eafe75a02f4ced659bee03f50797806fa2fa v1-5-pruned-emaonly.safetensors

[KaizerHanz]

@viking1304
Yes, I've got proper result when using CPU Only.
here the test (including log console) :

dreamshaper_v8_cpu_default_folder

log_dreamshaper_default_folder.txt

dreamshaper_v8_cpu_test_folder

log_dreamshaper_test_folder.txt

SHA256

[viking1304]

Everything looks fine in logs, and your model is not corrupted. I am afraid you might need to downgrade, since CPU only mode will be too slow.

Unfortunately, only Intel Mac that I can use for test is iMac that cannot be upgraded to above 13.7. I do not have access to any Macbooks with Intel anymore, but if I manage to find one I will try.

[KaizerHanz]

@viking1304 No Problem, I'm very thank you for your time answers me. Hopefully one day we will "have" a solution (besides "Downgrading" of course 😅 ), but once again thank you sir. 🤝

[astr0gator]

Trying to run on M1 PRO MAX 64GB (Sonoma 14.5) with sd3.5_large.safetensors model (large, 16G).
UI is loaded successfully, after ~40 seconds of rendering image generation gives me this error:

NansException: A tensor with NaNs was produced in Unet. This could be either because there's not enough precision to represent the picture, or because your video card does not support half type. Try setting the "Upcast cross attention layer to float32" option in Settings > Stable Diffusion or using the --no-half commandline argument to fix this. Use --disable-nan-check commandline argument to disable this check.

Tried:

• setting "Upcast cross attention layer to float32"
• --xformers --no-half-vae
• --skip-torch-cuda-test --no-half-vae

Related r/StableDiffusion thread.

Thanks.

[DDC3344]

这是来自QQ邮箱的假期自动回复邮件。   您好，您的邮件已收到。我会在考到消息后第一时间回复您。若内容紧要，请电话通知我，以免耽误！谢谢！

[lishrliu]

Can't load tokenizer for 'openai/clip-vit-large-patch14'.

./webui.sh

################################################################
Install script for stable-diffusion + Web UI
Tested on Debian 11 (Bullseye), Fedora 34+ and openSUSE Leap 15.4 or newer.
....
Accelerating launch.py...
################################################################
The following values were not passed to accelerate launch and had defaults used instead:
--num_processes was set to a value of 0
--num_machines was set to a value of 1
--mixed_precision was set to a value of 'no'
--dynamo_backend was set to a value of 'no'
To avoid this warning pass in values for each of the problematic parameters or run accelerate config.
Python 3.10.16 (main, Dec 3 2024, 17:27:57) [Clang 16.0.0 (clang-1600.0.26.4)]
Version: v1.10.1
Commit hash: 82a973c
Launching Web UI with arguments: --opt-split-attention --disable-nan-check --skip-torch-cuda-test --use-cpu interrogate
/Users/xx/StableDiffusion/WebUI/venv/lib/python3.10/site-packages/timm/models/layers/init.py:48: FutureWarning: Importing from timm.models.layers is deprecated, please import via timm.layers
warnings.warn(f"Importing from {name} is deprecated, please import via timm.layers", FutureWarning)
no module 'xformers'. Processing without...
no module 'xformers'. Processing without...
No module 'xformers'. Proceeding without it.
Warning: caught exception 'Torch not compiled with CUDA enabled', memory monitor disabled
sd-webui-prompt-all-in-one background API service started successfully.
Calculating sha256 for /Users/xx/StableDiffusion/WebUI/models/Stable-diffusion/anything-v5-PrtRE.safetensors: Running on local URL: http://127.0.0.1:7861
7f96a1a9ca9b3a3242a9ae95d19284f0d2da8d5282b42d2d974398bf7663a252
Loading weights [7f96a1a9ca] from /Users/xx/StableDiffusion/WebUI/models/Stable-diffusion/anything-v5-PrtRE.safetensors
Creating model from config: /Users/xx/StableDiffusion/WebUI/configs/v1-inference.yaml
/Users/xx/StableDiffusion/WebUI/venv/lib/python3.10/site-packages/huggingface_hub/file_download.py:795: FutureWarning: resume_download is deprecated and will be removed in version 1.0.0. Downloads always resume when possible. If you want to force a new download, use force_download=True.
warnings.warn(

To create a public link, set share=True in launch().
Startup time: 6.7s (prepare environment: 0.1s, import torch: 2.1s, import gradio: 0.6s, setup paths: 0.6s, initialize shared: 0.2s, other imports: 0.3s, load scripts: 0.2s, create ui: 0.3s, gradio launch: 2.3s).
/Users/xx/StableDiffusion/WebUI/venv/lib/python3.10/site-packages/huggingface_hub/file_download.py:795: FutureWarning: resume_download is deprecated and will be removed in version 1.0.0. Downloads always resume when possible. If you want to force a new download, use force_download=True.
warnings.warn(
creating model quickly: OSError
Traceback (most recent call last):
File "/opt/homebrew/Cellar/[email protected]/3.10.16/Frameworks/Python.framework/Versions/3.10/lib/python3.10/threading.py", line 973, in _bootstrap
self._bootstrap_inner()
File "/opt/homebrew/Cellar/[email protected]/3.10.16/Frameworks/Python.framework/Versions/3.10/lib/python3.10/threading.py", line 1016, in _bootstrap_inner
self.run()
File "/opt/homebrew/Cellar/[email protected]/3.10.16/Frameworks/Python.framework/Versions/3.10/lib/python3.10/threading.py", line 953, in run
self._target(*self._args, **self._kwargs)
File "/Users/xx/StableDiffusion/WebUI/modules/initialize.py", line 149, in load_model
shared.sd_model # noqa: B018
File "/Users/xx/StableDiffusion/WebUI/modules/shared_items.py", line 175, in sd_model
return modules.sd_models.model_data.get_sd_model()
File "/Users/xx/StableDiffusion/WebUI/modules/sd_models.py", line 693, in get_sd_model
load_model()
File "/Users/xx/StableDiffusion/WebUI/modules/sd_models.py", line 820, in load_model
sd_model = instantiate_from_config(sd_config.model, state_dict)
File "/Users/xx/StableDiffusion/WebUI/modules/sd_models.py", line 775, in instantiate_from_config
return constructor(**params)
File "/Users/xx/StableDiffusion/WebUI/repositories/stable-diffusion-stability-ai/ldm/models/diffusion/ddpm.py", line 563, in init
self.instantiate_cond_stage(cond_stage_config)
File "/Users/xx/StableDiffusion/WebUI/repositories/stable-diffusion-stability-ai/ldm/models/diffusion/ddpm.py", line 630, in instantiate_cond_stage
model = instantiate_from_config(config)
File "/Users/xx/StableDiffusion/WebUI/repositories/stable-diffusion-stability-ai/ldm/util.py", line 89, in instantiate_from_config
return get_obj_from_str(config["target"])(**config.get("params", dict()))
File "/Users/xx/StableDiffusion/WebUI/repositories/stable-diffusion-stability-ai/ldm/modules/encoders/modules.py", line 103, in init
self.tokenizer = CLIPTokenizer.from_pretrained(version)
File "/Users/xx/StableDiffusion/WebUI/venv/lib/python3.10/site-packages/transformers/tokenization_utils_base.py", line 1809, in from_pretrained
raise EnvironmentError(
OSError: Can't load tokenizer for 'openai/clip-vit-large-patch14'. If you were trying to load it from 'https://huggingface.co/models', make sure you don't have a local directory with the same name. Otherwise, make sure 'openai/clip-vit-large-patch14' is the correct path to a directory containing all relevant files for a CLIPTokenizer tokenizer.

Failed to create model quickly; will retry using slow method.
loading stable diffusion model: OSError
Traceback (most recent call last):
File "/opt/homebrew/Cellar/[email protected]/3.10.16/Frameworks/Python.framework/Versions/3.10/lib/python3.10/threading.py", line 973, in _bootstrap
self._bootstrap_inner()
File "/opt/homebrew/Cellar/[email protected]/3.10.16/Frameworks/Python.framework/Versions/3.10/lib/python3.10/threading.py", line 1016, in _bootstrap_inner
self.run()
File "/opt/homebrew/Cellar/[email protected]/3.10.16/Frameworks/Python.framework/Versions/3.10/lib/python3.10/threading.py", line 953, in run
self._target(*self._args, **self._kwargs)
File "/Users/xx/StableDiffusion/WebUI/modules/initialize.py", line 149, in load_model
shared.sd_model # noqa: B018
File "/Users/xx/StableDiffusion/WebUI/modules/shared_items.py", line 175, in sd_model
return modules.sd_models.model_data.get_sd_model()
File "/Users/xx/StableDiffusion/WebUI/modules/sd_models.py", line 693, in get_sd_model
load_model()
File "/Users/xx/StableDiffusion/WebUI/modules/sd_models.py", line 829, in load_model
sd_model = instantiate_from_config(sd_config.model, state_dict)
File "/Users/xx/StableDiffusion/WebUI/modules/sd_models.py", line 775, in instantiate_from_config
return constructor(**params)
File "/Users/xx/StableDiffusion/WebUI/repositories/stable-diffusion-stability-ai/ldm/models/diffusion/ddpm.py", line 563, in init
self.instantiate_cond_stage(cond_stage_config)
File "/Users/xx/StableDiffusion/WebUI/repositories/stable-diffusion-stability-ai/ldm/models/diffusion/ddpm.py", line 630, in instantiate_cond_stage
model = instantiate_from_config(config)
File "/Users/xx/StableDiffusion/WebUI/repositories/stable-diffusion-stability-ai/ldm/util.py", line 89, in instantiate_from_config
return get_obj_from_str(config["target"])(**config.get("params", dict()))
File "/Users/xx/StableDiffusion/WebUI/repositories/stable-diffusion-stability-ai/ldm/modules/encoders/modules.py", line 103, in init
self.tokenizer = CLIPTokenizer.from_pretrained(version)
File "/Users/xx/StableDiffusion/WebUI/venv/lib/python3.10/site-packages/transformers/tokenization_utils_base.py", line 1809, in from_pretrained
raise EnvironmentError(
OSError: Can't load tokenizer for 'openai/clip-vit-large-patch14'. If you were trying to load it from 'https://huggingface.co/models', make sure you don't have a local directory with the same name. Otherwise, make sure 'openai/clip-vit-large-patch14' is the correct path to a directory containing all relevant files for a CLIPTokenizer tokenizer.